GE Café Error Codes
Oven F-Codes, Induction & Advantium — What They Mean
GE Cafe (written Café on the brand) is GE's design-forward luxury line — induction and dual-fuel ranges, customizable hardware, French-door refrigerators, and Advantium speed ovens. Oven F-codes follow the GE scheme; induction and Advantium faults differ by model, so for those we start from the symptom and the model number.
- 4.5★ · 900+
- 1-Yr Warranty
- OEM Parts
- Same-Day
Same-day windows
Call early for a same-day route.
Serving the Twin Cities
$149 trip fee, credited to repair.
EPA 608 certified
Sealed-system & refrigerant work.
1-year warranty
Parts and labor in writing.
Quick answer
GE Café Error Code Repair — Twin Cities — Quick Answer
What we fix in the Twin Cities
The Twin Cities repair mix
Induction range faults
Induction codes differ by model, so send us the exact display and model number. The most common complaint is a burner that reports no pan detected: the pan must be magnetic (a fridge magnet should stick to the bottom), and if a known-good pan is still rejected the detection circuit may have failed. Cooling-fan and element-board faults can also shut an induction unit down. $385–$685 OEM depending on which board.
Advantium speed oven faults
Advantium codes differ by model, so send us the exact display and model number. The unit combines microwave + halogen + convection, so the cause may be the magnetron, a sensor or the inverter board — we test before replacing. Parts are expensive but the unit is, too ($2.5K+ new), so repair is often worth it. $485–$885 OEM depending on the part.
GE Café repair in the Twin Cities
We service GE Cafe induction element boards, generator boards, cooling fans, oven sensors, latch motors, Advantium magnetrons and inverters, and main boards. 1-year written parts-and-labor warranty.
Need appliance repair in the Twin Cities? Call 7am–9pm, every day.
FAQ
Appliance repair in the Twin Cities: FAQs
Why does my GE Cafe induction say there is no pan?
No pan detected. First check the pan — must be magnetic (a fridge magnet should stick to the bottom). If a known-good pan still says no pan, the detection circuit may have failed. $385–$585 OEM.
What causes a GE Cafe Advantium to stop microwaving?
A failed magnetron, inverter board or high-voltage diode are the usual causes. We test the inverter and diode before replacing the magnetron, which runs $485–$685 OEM.
Is GE Café worth repairing?
Almost always. Café ranges and ovens cost $3K–$8K new, Advantium speed ovens $2.5K+. A repair is often far less than a new unit, and we give a written quote before any part is ordered.
How much does GE Café repair cost?
Most Café repairs land $345–$685 OEM. Induction element board $385–$585. Generator board $485–$685. Oven sensor $245–$345. Latch motor $345–$485. Advantium magnetron $485–$685. The $149 trip fee is credited toward the repair when you approve it.
Related repair pages
- GE appliance repair (hub) →
- GE Profile refrigerator error codes →
- GE refrigerator error codes →
- Luxury appliance repair →
- Oven not heating →
- Cooktop burner not working →
- Appliance repair Minneapolis (hub) →
- Refrigerator repair Minneapolis →
- Washer repair Minneapolis →
- Dryer repair Minneapolis →
- Dishwasher repair Minneapolis →
- Oven repair Minneapolis →
- Sub-Zero repair Minneapolis →
- Samsung repair Minneapolis →
What will this cost?
Pricing & repair-cost pages
Trying to decide repair vs. replace? These pages break down real Twin Cities pricing by brand, model class, and failure mode.
Need a tech, not a guide?
Book this repair in your city
Book appliance repair in the Twin Cities
Have your model and serial number handy. Call early and we can often get you a same-day window across the Twin Cities.
GE Cafe oven F-codes: what they mean and what we check
GE Cafe wall ovens and ranges use the same F-code scheme as other GE ovens. We list the codes we are confident about. Induction cooktop and speed oven codes differ by model, so for those we start from the symptom and the model number.
| Code | What it means | What we check |
|---|---|---|
| F3 | Oven temperature sensor circuit open | Sensor resistance, wire harness, control connection |
| F4 | Oven temperature sensor circuit shorted | Sensor resistance, wire harness, control connection |
| F7 | A keypad button reads as pressed | Keypad or touch panel and its ribbon connection |
| Induction burner says no pan | Pan not detected, or the sensing circuit has failed | Pan material and size first, then the burner detection circuit |
Published prices on this page: oven sensor $245 to $345, induction element board $385 to $585. The $149 trip fee is credited toward the repair when you approve it.
Why does my GE Cafe induction cooktop say there is no pan?
Induction heats only magnetic cookware. If a magnet does not stick firmly to the bottom of your pan, the burner will not heat it. Pans that are warped, too small for the burner, or set off center can also fail the detection check.
Try a pan you know is magnetic and sit it squarely on the marked ring. If the burner heats, the problem was the pan. If a known-good pan is still rejected, the detection circuit may have failed, which we diagnose with the unit's service tools. Central Minnesota Appliance Repair can check it and quote the repair first.
Can I reset an F-code on a GE Cafe oven?
Yes, once. Press Clear/Off, or turn the breaker off for a minute and back on. If a code came from a power blip, it will not return. If it comes back, write it down and stop using the self-clean cycle, which is hard on latches and sensors.
Do not open the control panel or the oven back yourself. Cafe ovens run on 240 volts and the controls are behind sealed panels.
When does a GE Cafe repair make financial sense?
Often, since these are higher-priced appliances with built-in or custom cabinetry. Replacing a Cafe oven or range can also mean cabinet or countertop changes. We give a written quote, and you can compare it with the price of a new unit.
For related products, see our GE appliance repair page and our oven not heating guide. Repairs carry a 1-year written parts-and-labor warranty.
More GE Cafe questions
Does a Cafe induction range need special cookware?
Yes, magnetic cookware. Cast iron and many stainless pans work, while aluminum and glass do not unless they have a magnetic base.
Why does my Cafe oven fan run after I turn it off?
A cooling fan keeps running to protect the controls. That is normal until the cavity cools.
Where is the GE Cafe model number?
On the frame when the oven door is open, or on the range edge near the drawer.
Can I use the oven with a sensor code?
Not reliably. A bad sensor can cause wrong temperatures and burnt food, so stop and call.