OVEN REPAIR · MINNEAPOLIS

Oven & Range Repair in Minneapolis, MN

Gas and electric oven, range, and wall-oven repair across every Minneapolis neighborhood — from standard Whirlpool slide-ins in South Minneapolis rentals to Wolf Pro-48 and Thermador Pro Grand ranges in Kenwood and Linden Hills remodels. Bake elements, igniters, control boards, convection-fan motors — truck stock covers the top failures across every major brand.

  • 4.5★ · 990+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
(651) 364-7466
$149Trip feeWaived on repair
See brands we service
  • Same-day windows

    Call before 2pm for today's route.

  • Every Minneapolis ZIP

    55401–55455. No trip charge.

  • EPA 608 certified

    Sealed-system & refrigerant work.

  • 1-year warranty

    Parts and labor in writing.

Updated June 29, 2026 · Reviewed by service manager

Quick answer

Oven & Range Repair in Minneapolis, MN — Quick Answer

Looking for the broader appliance repair Minneapolis hub? It covers every ZIP, brand, and appliance we service.

What we fix in Minneapolis

The Minneapolis repair mix

Won't heat — gas ovens

Hot-surface igniter failure is the #1 gas-oven call. The igniter glows but doesn't open the gas valve because it's drawing too little current — a classic igniter end-of-life pattern. We test the igniter draw with an amp clamp before condemning the gas valve. Truck stock covers Wolf, Viking, Thermador, GE, Whirlpool, and KitchenAid igniters.

Won't heat — electric ovens

Bake-element burnout (visible break in the element coil), broil-element failure, or the EOC / control-board fault that's been a Whirlpool / GE staple. We test elements with a meter before condemning the board.

Wolf, Thermador and Viking pro-style ranges

Kenwood, Linden Hills, Lake of the Isles, and North Loop kitchens run Wolf DF and M-series ranges, Thermador Pro Grand, and Viking Professional. Our senior built-in tech handles these directly — factory-trained on the burner-assembly, simmer-valve, and convection-system work. The Minneapolis mid-century housing stock often has undersized gas supply lines that need testing before condemning a pro-style component.

Control-board and touch-panel failures

Wall-oven keypad faults (F2E0 / F2E1 across KitchenAid, F2 / F3 across GE Profile), Bosch HBL/HSLP touch-control boards, and Samsung NX-series board failures. Keypad and control board share a connector on most brands — we test the keypad before condemning the board.

From the truck

Field-service notes on oven repair

Oven Repair in the Twin Cities has its own rhythm — a repeating set of failures we see week after week. Well water in the outer western suburbs (Minnetonka, Wayzata, Orono) adds iron and manganese loading that plugs ice-maker inlet screens and dishwasher wash-arm nozzles inside 18 months without a softener.

Because this page focuses on won't heat — gas ovens, our tech opens the call by isolating that subsystem before touching anything else. OEM parts get sourced from Marcone, Reliable Parts, and 1st Source — never Amazon or eBay for anything sealed-system, control, or safety-critical. The $149 residential diagnostic is credited toward the repair if you approve; if you don't, you pay only the diagnostic and we leave a written scope. Every completed repair carries a 1-year parts and labor warranty in writing. The section above covers the specific failure surface — hot-surface igniter failure is the #1 gas-oven call.

Most first-visit calls close same-day for common failure modes; parts-return trips are typically 2–4 business days when we need a factory-only component. We're EPA 608 certified for sealed-system and refrigerant work, licensed and insured in Minnesota, and every tech carries a factory diagnostic laptop for brand-specific service modes. If the model is out of parts support, we'll say so on the first call and refund the diagnostic — that's the honest read on a repair-vs-replace decision, and it's the same read we'd give a family member calling about the same oven.

FAQ

Minneapolis questions, answered

  • Same-day oven repair in Minneapolis?

    Same-day windows are typical for oven repair calls in Minneapolis when you book before 2pm — our trucks already run the metro daily. Later in the day usually means a next-business-morning slot. We confirm a 2-hour window the morning of the visit and call when the tech is 20 minutes out.

  • Cost?

    Most oven repairs in Minneapolis land $225–$525 all-in — parts, labor, and the $149 trip fee (which is credited toward the repair when you approve the work). Sealed-system or compressor work runs higher and we always quote that up front. Every job ships with a 1-year written parts-and-labor warranty.

  • Do you fix Wolf, Thermador, and Viking?

    Yes — our senior built-in tech is factory-trained on all three, runs Minneapolis weekly, and handles burner-assembly, simmer-valve, and convection work directly. We're factory-trained on the premium platforms and carry their proprietary diagnostic tools — most general-repair shops have to sub these brands out or order parts after the first visit.

  • Gas and electric?

    Both. Licensed for gas appliance work and equipped to test supply pressure as part of every gas-oven diagnostic.

  • Cooktops and ranges too?

    Yes — induction tops with F84/F85 faults, gas cooktops with igniter / valve work, slide-in ranges, drop-in ranges, and freestanding.

  • Warranty?

    Yes — every appliance oven repair repair we complete in Minneapolis carries a 1-year written parts-and-labor warranty at no extra charge. It's printed on the invoice, not buried in a separate purchase. If the same failure recurs inside the warranty window we come back free, replace the part, and re-test.

Book oven repair in Minneapolis

Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.

Brands we service in Minneapolis

Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.