Oven & Range Repair Cost in Minneapolis, MN
Most Minneapolis oven and range repairs land $245–$525 all-in. Wolf and Viking pro ranges in the Kenwood/Linden Hills remodel belt push higher; Whirlpool AccuBake and Frigidaire in original bungalow kitchens sit at the low end. The biggest single-repair variable is whether the failure is downstream of a self-clean cycle — that shifts the odds toward a $445+ control-board job.
- 4.5★ · 900+
- 1-Yr Warranty
- OEM Parts
- Same-Day
Same-day windows
Call early for a same-day route.
Every Minneapolis ZIP
55401–55455. $149 trip fee, credited to repair.
EPA 608 certified
Sealed-system & refrigerant work.
1-year warranty
Parts and labor in writing.
Updated July 3, 2026
Quick answer
Oven & Range Repair Cost in Minneapolis — Quick Answer
Looking for the broader appliance repair Minneapolis hub? It covers every ZIP, brand, and appliance we service.
What we fix in Minneapolis
Oven repairs we do most in Minneapolis
What we service across Minneapolis kitchens
Wolf DF, GR, and R-series dual-fuel and gas ranges dominate the Kenwood, Bryn Mawr, and Linden Hills remodel belt. GE Cafe and Profile slide-ins run heavy in newer builds around Northeast and North Loop. Bosch HBL wall ovens are common in loft conversions. Whirlpool AccuBake and Kenmore Elite freestanding ranges still fill original bungalow kitchens in Nokomis, Longfellow, and Powderhorn. Viking VGR appears in older Southwest Minneapolis remodels (2000s vintage). Frigidaire dominates duplex-rental installs.
Diagnostic-to-price by symptom
Bake heats, broil doesn't (or reverse) → the failed element ($265–$385). Gas oven won't ignite → oven igniter first ($285–$395), safety valve second ($385–$525). Temperature 25°F+ off calibration → temp sensor ($245–$335), then relay board ($365–$525). F-code (F1/F2/F3/E-series) → temp-sensor circuit or control board. Door won't unlock after self-clean → latch motor ($285–$385) — a common post-self-clean failure. Induction burner not heating → coil or induction generator ($385–$685).
The self-clean warning we give every Minneapolis caller
Running self-clean on a Whirlpool, GE, or Frigidaire wall oven past year 8 can overheat the control board and stress the door-latch motor in the same cycle. If you're calling us about an oven that stopped working right after self-clean, budget for a control board ($445–$625) plus a latch motor ($285–$385). We tell every customer: on older units, manual clean beats self-clean forever.
Pro-range and induction pricing notes
Wolf igniter and spark-module work runs $345–$495 — we use OEM parts sourced through the regional distributor. Wolf infrared broiler modules are the most expensive single part we handle at $685–$925. GE and Bosch induction generators run $485–$785. Older Viking VGR ranges use spark ignition, so an igniter and spark-module refresh ($285–$395) is the usual fix, and we carry common kits on the truck.
Need oven repair in Minneapolis? Call 7am–9pm, every day.
Comparison
Oven and range repair cost by failure (Minneapolis 2026)
All-in pricing — parts + labor + $149 trip fee (credited to repair). 1-year written warranty.
| Failure | All-in cost |
|---|---|
| Bake or broil element | $265–$385 |
| Gas oven igniter | $285–$395 |
| Gas safety valve | $385–$525 |
| Temperature sensor (thermistor) | $245–$335 |
| Relay board / main control | $365–$525 |
| Self-clean door-latch motor | $285–$385 |
| Post-self-clean control board | $445–$625 |
| Wolf igniter / spark module | $345–$495 |
| Wolf infrared broiler module | $685–$925 |
| Induction generator (GE/Bosch) | $485–$785 |
FAQ
Oven repair questions for Minneapolis
Why does self-clean break so many ovens?
Self-clean runs the oven at 900°F for 3+ hours. That heat migrates into the control board bay and cooks the relay board's solder joints, and the door-latch motor gets stuck engaged when the plastic gear housing softens. Whirlpool, GE, and Frigidaire wall ovens past year 8 are especially prone — the failure shows up during cooldown, so people don't connect it to self-clean.
How much to fix a Wolf range in Minneapolis?
Wolf igniter/spark-module jobs run $345–$495. Bake-element replacement on a DF or GR is $325–$445. Infrared broiler module replacement is our most expensive Wolf job at $685–$925 — the part is OEM-only and takes 3–5 days to arrive. We service Wolf ranges with OEM parts and carry the common ignition and thermostat parts on the truck.
Is a 25°F temperature miss worth fixing?
Usually yes. First try your oven's calibration setting (see the owner's manual); if it is still 25°F+ off, the sensor is next. Most 25–50°F calibration misses are a $15 temp sensor plus 30 minutes of labor ($245–$335 all-in). If the miss is over 75°F or the sensor tests good, it's the relay board or main control ($365–$525). Baking cookies half-burned or roasting a chicken an hour late is worth the fix; the sensor is one of the highest-ROI parts on any oven.
How long does oven repair take?
The diagnostic takes 20–40 minutes. Many jobs are finished in that same visit because the common failure parts ride on the truck. If a part has to be ordered, it lands in 2–5 business days and we book the install the day it arrives — you never have to chase us for a status update.
Pages related to oven repair in Minneapolis
- Oven repair Minneapolis →
- Gas range repair →
- Cooktop repair →
- Wolf repair Minneapolis →
- Viking repair Minneapolis →
- GE repair Minneapolis →
- All appliance repair costs (Minneapolis) →
- Minneapolis appliance repair guide →
- Refrigerator repair Minneapolis →
- Washer repair Minneapolis →
- Dryer repair Minneapolis →
- Dishwasher repair Minneapolis →
- Sub-Zero repair Minneapolis →
- Samsung repair Minneapolis →
Need a tech, not a guide?
Book this repair in your city
Book oven repair in Minneapolis
For oven repair, have the model number from the data plate ready when you call. Call early for the best chance at a same-day window.
Brands we service alongside oven repair in Minneapolis
Brand pages with fault codes and pricing.