Do you fix GE Profile and Café in Minneapolis?

Yes — both are core to our daily Minneapolis route. Profile and Café share many parts with standard GE, so truck stock covers most calls on the first visit.

Can you service GE Monogram built-ins?

Yes. Monogram column refrigerators and built-in ranges in Kenwood, Lake of the Isles, and Linden Hills are handled by our senior built-in tech with EPA Section 608 certification for sealed-system work.

How much does GE refrigerator repair cost in Minneapolis?

Most GE ge appliance repairs in Minneapolis land $245–$525 all-in — parts, labor, and the $149 trip fee (which is credited toward the repair when you approve the work). Sealed-system or compressor work runs higher and we always quote that up front. Every job ships with a 1-year written parts-and-labor warranty.

Do you offer same-day GE repair?

Same-day windows are typical for ge appliance repair calls in Minneapolis when you book before 2pm — our trucks already run the metro daily. Later in the day usually means a next-business-morning slot. We confirm a 2-hour window the morning of the visit and call when the tech is 20 minutes out.

Is the GE Profile drain-line freeze worth fixing?

Yes — it's a common Profile bottom-freezer issue and the fix is a drain-line heater kit. Runs $245–$345 installed and the repeat rate is very low after the kit.

Do you warranty GE repairs?

Yes — every GE ge appliance repair repair we complete in Minneapolis carries a 1-year written parts-and-labor warranty at no extra charge. It's printed on the invoice, not buried in a separate purchase. If the same failure recurs inside the warranty window we come back free, replace the part, and re-test.

Which Minneapolis neighborhoods do you cover for GE repair?

All of Minneapolis — Uptown, Northeast, North Loop, Linden Hills, Powderhorn, Longfellow, Kingfield, Cedar-Riverside, Camden, and Nokomis included. GE jobs are on the daily Minneapolis loop, so most addresses see a same-day or next-morning window when you call before 2pm.

Do you service GE appliances in Minneapolis condos, lofts, and stacked-laundry installs?

Yes. GE repairs in Minneapolis cover single-family homes, North Loop and Mill District lofts, and condo buildings. We coordinate freight-elevator access and COIs with property management ahead of time, and we bring stair-rated tooling for stacked GE laundry units so the appliance does not have to be uninstalled to reach the back panel.

GE · MINNEAPOLIS

GE Appliance Repair in Minneapolis, MN

GE spans every Minneapolis price tier — standard GE in older South Minneapolis rentals, GE Profile in the central core, Café in the renovated kitchens through Linden Hills and Fulton, and Monogram built-ins in the higher-end Kenwood and Lake of the Isles remodels. One brand, four product tiers, and a truck stocked for all of them.

4.5★ · 990+
1-Yr Warranty
OEM Parts
Same-Day

(651) 364-7466

$149Trip feeWaived on repair

See brands we service

Same-day windows
Call before 2pm for today's route.
Every Minneapolis ZIP
55401–55455. No trip charge.
EPA 608 certified
Sealed-system & refrigerant work.
1-year warranty
Parts and labor in writing.

Updated June 9, 2026 · Reviewed by service manager

Quick answer

GE Appliance Repair in Minneapolis, MN — Quick Answer

Need same-day Mpls service? Start at our Minneapolis appliance repair page.

What we fix in Minneapolis

The Minneapolis repair mix

GE Profile and Café ranges

Profile slide-in surface-element failures, board faults (the F2 / F3 family), and the touch-control-panel failures that have been a Profile staple. Café dual-fuel ranges with igniter and bake-element work. We carry the common boards and elements; less-common boards next-day.

GE refrigerators — Profile bottom-freezer and Café French-door

Profile PFE/PYE bottom-freezer drain-line freeze-ups (the #1 GE fridge call), Café CYE/CWE French-door ice-maker assemblies, and the older GTE side-by-side condenser-fan failures. Sealed-system work on the higher-end Monogram built-ins by our EPA-certified senior tech.

Refrigerator repair Minneapolis

GE dishwashers (Profile, Café, GDF, GDT)

Drain-pump clogs, control-board failures, and the heating-element work driven by Minneapolis hard water. GDT/GDF and the newer Profile units share parts with the Café line — truck stock covers all of them.

Dishwasher repair Minneapolis

GE washers, dryers and Monogram built-ins

GE / Hotpoint top-load washer transmissions, GE front-load drain pumps, and electric & gas dryer heating circuits. For Monogram column refrigerators and built-in ranges in Kenwood and Lake of the Isles kitchens, our senior built-in tech handles the diagnosis and sealed-system work directly.

From the truck

Field-service notes on ge appliance repair

On ge appliance repair, we keep the diagnostic tight because the failure catalog on this brand is well-documented. The Twin Cities humidity swing — dry January to sticky July — cycles refrigerator door gaskets hard; a gasket that seals in March can pull ambient air by August and drive up compressor run time 15–20%.

Because this page focuses on ge profile and café ranges, our tech opens the call by isolating that subsystem before touching anything else. For anything that touches refrigerant, sealed-system, or a gas train, we run OEM parts from Marcone or the factory distributor — aftermarket boards in particular are a warranty landmine we won't ship on our truck. The $149 residential diagnostic is credited toward the repair if you approve; if you don't, you pay only the diagnostic and we leave a written scope. Every completed repair carries a 1-year parts and labor warranty in writing. The section above covers the specific failure surface — profile slide-in surface-element failures, board faults (the f2 / f3 family), and the touch-control-panel failures that have been a profile staple.

We stock the top-30 wear items for this brand on the truck, so the majority of first-visit calls close without a follow-up. We're EPA 608 certified for sealed-system and refrigerant work, licensed and insured in Minnesota, and every tech carries a factory diagnostic laptop for brand-specific service modes. If the model is out of parts support, we'll say so on the first call and refund the diagnostic — that's the honest read on a repair-vs-replace decision, and it's the same read we'd give a family member calling about the same ge appliance.

Coverage

Minneapolis neighborhoods we cover

Same-day service routes through every Minneapolis ZIP — no separate trip charge anywhere inside city limits.

Neighborhood deep-dives

Neighborhoods

Uptown
Northeast Minneapolis
Downtown
North Loop
Mill District
Powderhorn
Longfellow
Linden Hills
Kingfield
Lyn-Lake
Lyndale
Whittier
Loring Park
Cedar-Riverside
Marcy-Holmes
Como
Phillips
Standish-Ericsson
Seward
Prospect Park
Nokomis
Bryn Mawr
Fulton
Tangletown
Armatage
Windom
Diamond Lake
Audubon Park
Sheridan
St. Anthony East
St. Anthony West
Logan Park
Holland
Columbia Park
Waite Park
Webber-Camden
Folwell
Jordan
Hawthorne
Near North
Harrison
Cedar-Isles-Dean
East Isles
ECCO
Lowry Hill
Lowry Hill East
Stevens Square
Elliot Park
Kenwood
Lake of the Isles
Lake Harriet
Lake Calhoun / Bde Maka Ska

ZIP codes

55401, 55402, 55403, 55404, 55405, 55406, 55407, 55408, 55409, 55410, 55411, 55412, 55413, 55414, 55415, 55416, 55417, 55418, 55419, 55454, 55455

Response windows

Drive times from our Minneapolis hub

Same-day windows are based on truck position at the time you call. The matrix below reflects typical mid-day response from our 222 E Hennepin hub.

City	Drive time	Same-day cutoff
Minneapolis (city)	0–20 min	Daily, call before 2pm
St. Paul	15–25 min	Daily, call before 2pm
Edina	15–20 min	Daily, call before 2pm
Bloomington	20–25 min	Daily, call before 1pm
Eden Prairie	20–30 min	Daily, call before 1pm
Maple Grove	20–30 min	Daily, call before 1pm
Plymouth	20–25 min	Daily, call before 1pm
Roseville	15–20 min	Daily, call before 2pm
Woodbury	25–35 min	Daily, call before 12pm
Golden Valley	10–15 min	Daily, call before 2pm

FAQ

Minneapolis questions, answered

Do you fix GE Profile and Café in Minneapolis?
Yes — both are core to our daily Minneapolis route. Profile and Café share many parts with standard GE, so truck stock covers most calls on the first visit.
Can you service GE Monogram built-ins?
Yes. Monogram column refrigerators and built-in ranges in Kenwood, Lake of the Isles, and Linden Hills are handled by our senior built-in tech with EPA Section 608 certification for sealed-system work.
How much does GE refrigerator repair cost in Minneapolis?
Most GE ge appliance repairs in Minneapolis land $245–$525 all-in — parts, labor, and the $149 trip fee (which is credited toward the repair when you approve the work). Sealed-system or compressor work runs higher and we always quote that up front. Every job ships with a 1-year written parts-and-labor warranty.
Do you offer same-day GE repair?
Same-day windows are typical for ge appliance repair calls in Minneapolis when you book before 2pm — our trucks already run the metro daily. Later in the day usually means a next-business-morning slot. We confirm a 2-hour window the morning of the visit and call when the tech is 20 minutes out.
Is the GE Profile drain-line freeze worth fixing?
Yes — it's a common Profile bottom-freezer issue and the fix is a drain-line heater kit. Runs $245–$345 installed and the repeat rate is very low after the kit.
Do you warranty GE repairs?
Yes — every GE ge appliance repair repair we complete in Minneapolis carries a 1-year written parts-and-labor warranty at no extra charge. It's printed on the invoice, not buried in a separate purchase. If the same failure recurs inside the warranty window we come back free, replace the part, and re-test.
Which Minneapolis neighborhoods do you cover for GE repair?
All of Minneapolis — Uptown, Northeast, North Loop, Linden Hills, Powderhorn, Longfellow, Kingfield, Cedar-Riverside, Camden, and Nokomis included. GE jobs are on the daily Minneapolis loop, so most addresses see a same-day or next-morning window when you call before 2pm.
Do you service GE appliances in Minneapolis condos, lofts, and stacked-laundry installs?
Yes. GE repairs in Minneapolis cover single-family homes, North Loop and Mill District lofts, and condo buildings. We coordinate freight-elevator access and COIs with property management ahead of time, and we bring stair-rated tooling for stacked GE laundry units so the appliance does not have to be uninstalled to reach the back panel.

Related Minneapolis repair pages

Need fridge repair? See our Minneapolis page

Same-day refrigerator repair in Minneapolis — Sub-Zero, Samsung, LG, Whirlpool, KitchenAid. Flat $149 trip fee waived with repair, 1-year warranty on parts and labor.

Book ge appliance repair in Minneapolis

Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.

(651) 364-7466Contact us →

Brands we service in Minneapolis

Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.