GE Refrigerator PF Error
Power failure code — clear it in 30 seconds
PF on a GE, GE Profile, or GE Cafe refrigerator is a power-failure notification — the fridge is telling you it lost power and you should check that food in the freezer is still safe. It's not a fault — but if PF keeps showing without an actual outage, the main board or wiring is dropping voltage.
- 4.5★ · 900+
- 1-Yr Warranty
- OEM Parts
- Same-Day
Same-day windows
Call early for a same-day route.
Serving the Twin Cities
$149 trip fee, credited to repair.
EPA 608 certified
Sealed-system & refrigerant work.
1-year warranty
Parts and labor in writing.
Updated June 21, 2026
Quick answer
GE Refrigerator PF Repair — Twin Cities — Quick Answer
What we fix in the Twin Cities
The Twin Cities repair mix
Clearing PF
Press the 'Alarm Off' / reset button. The exact button and hold time vary by model, so check your owner's manual. PF clears right away if it was a one-time outage.
When PF keeps coming back
1) Plug a lamp into the same outlet — does it flicker? Bad outlet / breaker. 2) Is the outlet a GFCI that keeps tripping? Current electrical code often requires GFCI protection on kitchen outlets, so don't bypass it; a GFCI that trips repeatedly needs an electrician to check the circuit. 3) Still recurring with a steady outlet = main control board $385–$585 all-in.
Need appliance repair in the Twin Cities? Call 7am–9pm, every day.
FAQ
Refrigerator repair in the Twin Cities: FAQs
Is PF a problem?
Usually no — just a notification. If it keeps showing without an outage and the outlet tests fine, the control board may need replacement.
Should the fridge be on a GFCI?
Follow your local electrical code and your manual. Current code often requires GFCI protection on kitchen outlets. If a GFCI keeps tripping with the fridge plugged in, have an electrician check the circuit instead of bypassing it.
Is the food safe after PF?
Per the USDA, discard perishable food that has been above 40°F for more than 2 hours. A closed refrigerator keeps food safe for about 4 hours, and a full freezer stays frozen for about 48 hours (about 24 hours if half full). Keep the doors shut and check with a thermometer.
How much does it cost to fix a GE refrigerator PF error?
Clearing PF costs nothing. If it keeps returning without an outage and the outlet tests fine, a control repair runs $385–$585 all-in, including the $149 trip fee, which is credited toward the repair when you approve it. Every job carries a 1-year written parts-and-labor warranty.
Related repair pages
- GE appliance repair (hub) →
- All GE fridge codes →
- GE fridge repair cost →
- GE Profile refrigerator codes →
- Refrigerator not cooling →
- Appliance repair Minneapolis (hub) →
- Refrigerator repair Minneapolis →
- Washer repair Minneapolis →
- Dryer repair Minneapolis →
- Dishwasher repair Minneapolis →
- Oven repair Minneapolis →
- Sub-Zero repair Minneapolis →
- Samsung repair Minneapolis →
- LG repair Minneapolis →
What will this cost?
Pricing & repair-cost pages
Trying to decide repair vs. replace? These pages break down real Twin Cities pricing by brand, model class, and failure mode.
Need a tech, not a guide?
Book this repair in your city
Book refrigerator repair in the Twin Cities
Have your model and serial number handy. Call early and we can often get you a same-day window across the Twin Cities.
GE refrigerator power-interruption notices: what you see and what we check
Some GE refrigerators tell you when power was interrupted, and a few show a short notice on the display. The wording differs by model, so this table works from what happens in your kitchen.
| What you see | Likely cause | What we check |
|---|---|---|
| A power-related notice after a storm or outage | The refrigerator lost power and restarted | Whether food stayed cold, and whether the unit is cooling normally now |
| The notice appears with no known outage | Brief power loss from the outlet, cord, breaker or a surge protector | Plug test, outlet and cord condition, shared circuit, then the control board |
| Display blank or buttons unresponsive | No power to the control, or a failed display or board | Outlet, breaker, connectors, interface board |
| Unit restarts on its own now and then | Intermittent power or a failing control | Cord, plug and wall outlet before the board |
Not every GE model shows this notice or uses the same text. If yours does, read the exact characters and send us the model number from the tag inside the fresh-food compartment.
Is it safe to eat food after my GE refrigerator lost power?
What matters is how long the compartment stayed above 40 degrees Fahrenheit, not how the food feels. A packed freezer with the door shut stays frozen far longer than a sparse one, while the fresh-food side warms sooner. Put a thermometer in the fresh-food section. Per the USDA, a closed refrigerator keeps food safe for about 4 hours and a full freezer stays frozen for about 48 hours (about 24 hours if half full); discard perishables that have been above 40 degrees F for more than 2 hours.
Keep both doors shut during an outage. When power returns, check the thermometer before you trust the food. Food that still feels cold with ice crystals in the freezer is generally in better shape than food that has thawed and sat warm. If you are unsure, discard it. Raw meat, dairy and cooked leftovers are the first to throw out.
Minnesota winters can bring long outages. If the power will be off for a long time, moving freezer food to a cold garage can help only if the garage stays reliably cold, but avoid temperatures that swing above freezing. A cooler with ice is safer.
How do I stop my GE refrigerator losing power for no reason?
Start with the outlet and cord. Plug a lamp into the same outlet to see whether power is steady. Check that the plug is fully pushed in and not scorched. If the notice keeps coming back without an outage, a loose connection or a weak outlet may be the cause, and an electrician should look at the outlet.
A refrigerator should be plugged directly into a wall outlet, not an extension cord or a power strip. Compressors draw extra current at startup and can trip breakers on a shared circuit. If the breaker trips repeatedly or the outlet is warm, stop and call an electrician.
If the outlet is sound and the notice returns, the control board or its connectors may be intermittent. Central Minnesota Appliance Repair tests the supply first, so you do not pay for a board when the cause is the outlet. Our published range for a GE refrigerator control repair is $385 to $585 all-in, and the $149 trip fee is credited toward the repair when you approve it. See the GE refrigerator repair cost page and the GE refrigerator error codes list.
More questions about GE refrigerator power notices
Do I need a surge protector for my refrigerator?
A surge protector rated for large appliances can help against voltage spikes, but it will not repair a failing control. Do not use a basic power strip.
Should my refrigerator be on a GFCI outlet?
Follow your local electrical code and your manual. Current code often requires GFCI protection on kitchen outlets. If a refrigerator keeps tripping a GFCI, have an electrician look at the circuit instead of ignoring it.
How long should I wait before the refrigerator cools again after an outage?
Give it several hours and keep the doors closed. If it is still not cooling the next day, see our refrigerator-not-cooling guide and call.
Where is the model number on my GE refrigerator?
Usually on a tag inside the fresh-food compartment on the side wall. Photograph it before you call.