Same-Day Service
Beer warm, foamy pour, tower won't cool, CO2 emptying fast, or a sealed-system leak? We repair every major kegerator — True, Perlick, Marvel, U-Line built-ins plus EdgeStar, Kegco, Whynter, Avanti freestanding — across Minneapolis, Saint Paul, the Twin Cities, and Central MN. EPA-certified technicians. Open 7am–9pm every day with same-day appointments. 1-year written warranty.
Same-day windows
7am–9pm every day. Call early.
Faucet & coupler kits
Perlick 525/630 SS, washer kits, tower fans.
EPA 608 certified
Sealed-system refrigeration.
1-year warranty
Parts and labor in writing.
Quick answer
Most kegerator repairs land $185–$725 all-in. CO2 leaks and faucet rebuilds sit at the low end; sealed-system refrigeration, condenser fan replacement, and tower-cooling fan service sit at the high end. Built-in True, Perlick, and Marvel platforms cost more for parts than freestanding EdgeStar or Kegco units. EPA-certified technicians for sealed-system work. 1-year written warranty.
What's wrong
Failed condenser fan, dirty condenser coils (built-in units run hot in cabinetry), low refrigerant from a sealed-system leak, failed compressor start relay, or failed thermostat. EPA 608 sealed-system diagnosis on the first visit.
$285–$725 · 90–150 min
Thermostat failure (stuck closed), low refrigerant charge, condenser fan slowing down, or door seal letting warm air in. Common on built-in Marvel, True, and Perlick kegerators after the 10-year mark.
$325–$685 · 90–150 min
Thermostat set too low, thermostat sensor probe out of position, or a stuck temperature control. We recalibrate and verify with a digital probe at the keg-coupling height.
$185–$385 · 60–90 min
Beer too warm (sealed-system issue), CO2 pressure too high, dirty beer lines, a kinked or undersized beer line, a draft tower that's warmer than the keg, or a damaged faucet seat. We diagnose all six on-site.
$185–$385 · 60–90 min
Failed tower-cooling fan (kegerators with active tower cooling), or — on passive-cooled towers — insulation has degraded inside the tower. Tower fan motors are stocked OEM parts on the truck.
$245–$485 · 75–120 min
Slow CO2 leak — most often a worn keg-coupler washer, a loose CO2 regulator fitting, or a cracked beer-line tubing connection. We pressure-test the gas side and isolate the leak.
$149–$285 · 45–75 min
Stuck faucet handle, scored faucet seat from beer-line debris, or a leaky faucet shaft seal. We rebuild or replace the faucet — most kegerators use Perlick 525SS or 630SS forward-sealing faucets which we carry.
$185–$325 · 60–90 min
Cabinetry airflow insufficient — condenser can't reject heat. Common on built-in installs when the panel surround restricts the front-vent. We verify airflow and clean the coil.
$185–$325 · 60–90 min
Brands we service
FAQs
Most kegerator repairs land $185–$725 all-in (parts + labor, including the flat $149 trip fee, which is credited toward the repair when you approve it). CO2 leak diagnosis and beer-line cleaning sit at the low end; sealed-system refrigeration work, condenser fan motor replacement, and tower-cooling fan service sit at the high end. True, Perlick, and Marvel built-in kegerators run higher because the parts cost more.
We are open 7am–9pm every day and same-day appointments are available across the Twin Cities and Central MN; call early. We carry common thermostats, condenser fan motors, tower fans, Perlick faucet rebuild kits, and keg-coupler washers on every truck. Sealed-system refrigeration work sometimes needs a parts overnight.
Six common causes, in rough order of frequency: (1) beer is too warm (over 40°F at the keg — a refrigeration problem); (2) CO2 pressure is set too high (most US ales sit at 10–14 psi at 38°F); (3) beer lines are dirty (line cleaning every 2 weeks for active kegerators); (4) the draft tower is warmer than the keg (tower fan failure); (5) the keg coupler washer is worn (introduces air); (6) the faucet seat is scored. We diagnose all six on-site.
38°F at the keg coupling for standard American ales and lagers. Verify with a digital probe at the keg coupling, not at the thermostat sensor in the cabinet. CO2 pressure for 38°F service runs ~10–14 psi depending on the beer style. Higher temps require higher CO2 (warmer beer holds less CO2 in solution).
Yes — our technicians are EPA Section 608 certified. We have recovery machines, micron gauges, brazing torches, and access to OEM compressors and filter-driers for True, Perlick, Marvel, U-Line, and standalone kegerator platforms.
Built-in: True Residential, Perlick, Marvel, U-Line. Freestanding: EdgeStar, Kegco, Whynter, Avanti, Newair, Summit. Commercial pass-through kegerators in bars, breweries, restaurants, and event venues are quoted separately and often require larger sealed-system work.
Yes — we install conversion kits for dual-faucet to single-faucet (or vice versa), slim-keg to full-keg, sixtel and torpedo couplers, and homebrew Cornelius ball-lock/pin-lock kits. We also do CO2-to-Nitrogen conversions for stout-on-tap installs (separate gas line and N2 regulator required).
Three common causes: failed thermostat (stuck closed — the most common), low refrigerant charge (sealed-system leak), or a slowing condenser fan that can't reject heat. We diagnose with a clamp-on amp meter on the compressor, an electronic refrigerant leak detector on the sealed system, and a verify on the fan motor draw.
Yes — beer-line cleaning with caustic and acid cleaners is included on any kegerator repair call as a small add-on charge. For routine maintenance we recommend cleaning every 2 weeks on active kegerators. Standalone line-cleaning service (no repair) is available — call for pricing.
The flat residential trip fee is $149, credited toward the repair when you approve it. Commercial kegerators have a $175–$299 diagnostic that is not credited. You get a written quote before any parts are installed.
Every completed kegerator repair carries a 1-year parts-and-labor warranty in writing. Same failure inside 12 months, we come back free. Sealed-system refrigeration work carries the same 1-year warranty.
Built-in True, Perlick, and Marvel kegerators are almost always worth repairing through 15+ years — the chassis is sound and most failures are sub-$700 fixes. Freestanding EdgeStar, Kegco, Whynter, and Avanti kegerators under 8 years are worth repairing; past 10 years the sealed-system replacement cost often exceeds the unit's resale value.
Yes. Kegerators in bars, cafés and restaurants are commercial calls: the diagnostic is $175–$299 depending on the equipment and is not credited to the repair. Heavy-commercial pass-through, glycol-cooled, or long-draw systems are quoted separately and may be referred to a commercial refrigeration specialist. See our commercial appliance repair page for details.
