FULTON · MINNEAPOLIS

Appliance Repair in Fulton, Minneapolis

Fulton runs from 50th & France east to Lake Harriet — 1920s bungalows and Cape Cods, with heavy 2010s teardown/rebuild activity along Xerxes and Zenith. Installed base skews KitchenAid, Sub-Zero built-ins, Wolf ranges, and Bosch dishwashers on the remodels, with Whirlpool and Maytag holdovers in the original kitchens.

Last reviewed November 16, 2026

Quick answer

Appliance Repair — Fulton, Minneapolis: quick answer

Map of our Minneapolis, MN appliance repair service area

What we fix in Fulton, Minneapolis

Appliance repairs we do most in Fulton, Minneapolis

What we fix most in Fulton

Built-in and pro-style work: French-door refrigerator defrost problems, Sub-Zero condenser and door-gasket work, dishwasher fault codes, and Wolf igniter replacement.

Old bungalow, new appliance — installation gotchas

Fulton bungalow kitchens built for 30-inch top-freezers often cannot fit a 36-inch French-door refrigerator without cabinet work. We fix the install detail while we're on the diagnostic.

Every Minneapolis ZIP and neighborhood, from Downtown to Nokomis, is listed on our Minneapolis neighborhood and ZIP guide.

FAQ

Appliance repair questions for Fulton, Minneapolis

  • Do you service KitchenAid built-ins?

    Yes — we service KitchenAid built-in refrigerators and dishwashers. We are familiar with the shared Whirlpool platform and use OEM parts for common failures.

  • Wolf range repair near 50th & France?

    Yes — Wolf DF, GR, and R-series igniter, spark-module, and infrared broiler work.

  • Trip charge for Fulton?

    No separate fee. A flat $149 trip fee applies anywhere inside Minneapolis, and it is waived when you approve the repair.

  • My basement freezer is rusting at the base. Is it still safe to use?

    Surface rust is cosmetic, but rust near wiring or the compressor can become a problem. Raise the freezer off a damp floor, dry the base and have the unit checked if the rust is spreading.

  • Why does my basement washer smell musty?

    Mildew in the door seal or drawer. Leave the door ajar between loads, wipe the seal and run a monthly cleaning cycle.

  • Is the repair warranty written down?

    Yes. Twelve months on parts and labor, on the repair we complete.

  • How long does appliance repair take?

    The diagnostic is when the technician finds the failed part and quotes the repair in writing. If a part has to be ordered, we tell you at diagnosis and book the install once it arrives.

  • Is it worth repairing or should I replace the appliance?

    Our rule of thumb: repair when the fix is under about half the cost of a comparable new unit and the appliance is under 10–12 years old. Sealed-system and compressor failures on older budget units are usually replacement territory; control boards, pumps, igniters, elements, and valves are almost always worth fixing. We tell you which side of that line you're on before you spend anything.

Reviews · Minneapolis

What Minneapolis customers say

  • ✓ VERIFIED REVIEW

    “Our LG WT7305CW developed the classic drain-pump squeal. Tech swapped the pump in under an hour and didn't try to sell me a new washer.”

    J
    Jess H.
    Minneapolis, MN
  • ✓ VERIFIED REVIEW

    “Sub-Zero 648 in our Kenwood kitchen quit cooling on a Friday afternoon. Their built-in tech was out the same day, diagnosed a condenser fan motor, and had it running before dinner. Real expertise — not a generalist.”

    D
    Daniel P.
    Minneapolis, MN

Recent repairs

See all recent repairs

Book appliance repair in Fulton, Minneapolis

For appliance repair, have the model number from the data plate ready when you call. Same-day appointments are available 7am to 9pm every day.

Central Minnesota Appliance Repair, 222 E Hennepin Ave, Minneapolis, MN 55414. (651) 364-7466. Open 7am-9pm every day.

Contact us →

Fulton kitchens: questions worth answering before the visit

My bungalow kitchen has a new French-door refrigerator and the ice maker leaks. Why?

A fill line routed through a tight cabinet cutout can kink, and a loose compression fitting weeps slowly. We check the line path, the shutoff and the inlet valve before replacing anything.

The dishwasher in a remodeled Fulton kitchen drains slowly. Is it the pump?

Often it is the drain hose loop or a disposal knockout plug that was never removed. A clogged filter basket is the other common cause. The pump is checked last.

Is it safe to keep using a range that clicks after the burner lights?

Constant clicking usually means moisture or debris at the igniter. Turn the burner off, let it dry and reseat the burner cap. If it keeps clicking, or you smell gas, stop using it and call.

How do I know whether a 20-year-old Whirlpool or Maytag is worth fixing?

Ask for the repair quote in writing and compare it with a comparable new unit. If the quote is a large share of replacement and the unit has had other faults, replacing is reasonable.

Fitting a modern appliance into a Fulton bungalow kitchen

Many Fulton homes are older houses where the kitchen was laid out around smaller appliances. When a larger refrigerator, a deeper range or a panel-ready dishwasher goes into that space, service access and utility connections become the weak points.

On a refrigerator, look at how far the unit sits from the wall. If the back is pressed flat, the condenser cannot shed heat and the compressor runs longer. On a dishwasher, look at the hose behind the unit: a sharp bend at the cabinet side can restrict drainage even with a healthy pump. On a range, check the leveling feet and the anti-tip bracket.

None of this needs more than a flashlight. If something looks pinched, damaged or leaking, switch off power or water to that appliance and call, rather than forcing the unit around.

What the technician checks first on Fulton calls

Refrigerators

Condenser and evaporator airflow, door seal, defrost cycle, then water line and ice-maker path.

Dishwashers

Filter, drain loop, inlet screen, door latch, then control board.

Ranges and wall ovens

Igniter or element, temperature sensor, then control relays. Gas connections are inspected with the appliance off.

Washers and dryers

Drain, door lock and vent path before any electronic part.

Appliances in damp basements

A basement adds moisture, and moisture affects appliances in a few predictable ways.

Chest and upright freezers

A freezer on a damp floor can rust at the base and corrode its wiring. Keep it on a raised pad and wipe condensation from the lid gasket.

Washers

A washer that stays damp grows mildew in its seal and drawer, which is the usual source of a musty smell.

Dryers

Basement dryers vent through a rim joist, and moist air condenses in a long outside run in cold weather. Clean the vent and insulate exposed duct.

Second refrigerators

A refrigerator in a basement works against a cool room in winter and a damp room in summer. Coils clog with dust, so vacuum them twice a year.

A twice-a-year routine for basement appliances

Spring and fall are good moments to look over the machines in a basement. Vacuum the refrigerator and freezer coils, wipe condensation from the freezer lid gasket, clear the dryer vent and the exterior flap, and inspect the washer hoses for bulges and drips.

Look at the floor too. A washer that has leaked even a little leaves a stain or soft flooring, and a floor drain that is blocked turns a small leak into a larger one. Each of those checks takes minutes and catches a failure before it becomes a repair call.

If a check turns up something you cannot fix, the written diagnosis from our visit tells you what failed and what the repair would cost.

Central Minnesota Appliance Repair · Independent appliance repair since 2009 · Open daily 7am to 9pm · (651) 364-7466 · 222 E Hennepin Ave, Minneapolis