DISHWASHER REPAIR COST · MINNEAPOLIS

Dishwasher Repair Cost in Minneapolis, MN

Most Minneapolis dishwasher repairs land $235–$465 all-in. What actually drives the price is which failure you have and which brand — a Bosch E15 flood alarm is a different job than a Whirlpool WDT drain pump. Below is what we charge by failure, plus the brand and age mix we see across Minneapolis kitchens.

  • 4.5★ · 990+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
(651) 364-7466
$149Trip feeWaived on repair
See brands we service
  • Same-day windows

    Call before 2pm for today's route.

  • Every Minneapolis ZIP

    55401–55455. No trip charge.

  • EPA 608 certified

    Sealed-system & refrigerant work.

  • 1-year warranty

    Parts and labor in writing.

Updated July 3, 2026 · Reviewed by service manager

Quick answer

Dishwasher Repair Cost in Minneapolis — Quick Answer

Need same-day Mpls service? Start at our Minneapolis appliance repair page.

What we fix in Minneapolis

The Minneapolis repair mix

What we see across Minneapolis kitchens

Bosch 300/500/800 dominates post-2015 Southwest Minneapolis remodels (Linden Hills, Fulton, Kingfield); KitchenAid KDPM/KDTE runs heavy in newer builds and Northeast remodels; original bungalow kitchens still have 10–20 year Whirlpool WDT and Kenmore Elite tall-tubs; Miele G-series shows up in Kenwood and Bryn Mawr. Frigidaire and GE are common in rental duplexes and Uptown condos. What we service any given day is 60% Bosch/KitchenAid/Whirlpool.

Diagnostic-to-price by symptom

Standing water in the tub → drain pump or clogged sump/air-gap ($245–$345). Bosch E15 flashing + flood-tray water → aquastop leak-sensor float triggered by a real leak, usually sump gasket or hose ($285–$425). Not drying → heating element on older units ($255–$365), or fan/vent motor on Bosch condensation dry ($295–$395). Won't start / no power → door latch or thermal fuse ($225–$315). Beeps + F- or E-code but runs → control board or user interface ($345–$525).

Minneapolis hard-water tax

Minneapolis water runs ~140 ppm from the treatment plant — hard enough to scale spray-arm bearings and coat heating elements inside 6–8 years. Half of the "my dishwasher isn't cleaning" calls we take resolve with a spray-arm bearing kit and a limescale flush ($195–$265) rather than a pump replacement. We check that before quoting the bigger job.

When a dishwasher stops making sense to fix

Bosch and Miele consistently earn their repair past year 10 — parts stay available, tubs are stainless. Whirlpool/KitchenAid plastic-tub units past year 8 with a control-board failure are usually replace-not-repair. We say so at the diagnostic; the $149 still gets you a written failure report you can hand a new installer.

From the truck

Field-service notes on dishwasher repair

Dishwasher Repair in the Twin Cities has its own rhythm — a repeating set of failures we see week after week. Older Twin Cities housing stock (pre-1970 Kenwood, Como, Highland Park, Northeast) frequently has 15A dedicated circuits feeding modern 20A-rated appliances, which shows up as intermittent shutdowns misread as control-board failure.

Because this page focuses on what we see across minneapolis kitchens, our tech opens the call by isolating that subsystem before touching anything else. For anything that touches refrigerant, sealed-system, or a gas train, we run OEM parts from Marcone or the factory distributor — aftermarket boards in particular are a warranty landmine we won't ship on our truck. The $149 residential diagnostic is credited toward the repair if you approve; if you don't, you pay only the diagnostic and we leave a written scope. Every completed repair carries a 1-year parts and labor warranty in writing. The section above covers the specific failure surface — bosch 300/500/800 dominates post-2015 southwest minneapolis remodels (linden hills, fulton, kingfield); kitchenaid kdpm/kdte runs heavy in newer builds and northeast remodels; original bungalow kitchens still have 10–20 year whirlpool wdt and kenmore elite tall-tubs; miele g-series shows up in kenwood and bryn mawr.

Most first-visit calls close same-day for common failure modes; parts-return trips are typically 2–4 business days when we need a factory-only component. We're EPA 608 certified for sealed-system and refrigerant work, licensed and insured in Minnesota, and every tech carries a factory diagnostic laptop for brand-specific service modes. If the model is out of parts support, we'll say so on the first call and refund the diagnostic — that's the honest read on a repair-vs-replace decision, and it's the same read we'd give a family member calling about the same dishwasher.

Comparison

Dishwasher repair cost by failure (Minneapolis 2026)

All-in pricing — parts + labor + $149 trip fee (credited to repair). 1-year written warranty.

FailureAll-in cost
Drain pump replacement$245–$345
Wash motor / circulation pump$315–$465
Bosch E15 aquastop + leak source$285–$425
Door latch / interlock$225–$315
Heating element (older units)$255–$365
Control board / user interface$345–$525
Sump gasket / tub leak$285–$425
Spray-arm bearing + limescale service$195–$265

Coverage

Minneapolis neighborhoods we cover

Same-day service routes through every Minneapolis ZIP — no separate trip charge anywhere inside city limits.

Neighborhoods

  • Uptown
  • Northeast Minneapolis
  • Downtown
  • North Loop
  • Mill District
  • Powderhorn
  • Longfellow
  • Linden Hills
  • Kingfield
  • Lyn-Lake
  • Lyndale
  • Whittier
  • Loring Park
  • Cedar-Riverside
  • Marcy-Holmes
  • Como
  • Phillips
  • Standish-Ericsson
  • Seward
  • Prospect Park
  • Nokomis
  • Bryn Mawr
  • Fulton
  • Tangletown
  • Armatage
  • Windom
  • Diamond Lake
  • Audubon Park
  • Sheridan
  • St. Anthony East
  • St. Anthony West
  • Logan Park
  • Holland
  • Columbia Park
  • Waite Park
  • Webber-Camden
  • Folwell
  • Jordan
  • Hawthorne
  • Near North
  • Harrison
  • Cedar-Isles-Dean
  • East Isles
  • ECCO
  • Lowry Hill
  • Lowry Hill East
  • Stevens Square
  • Elliot Park
  • Kenwood
  • Lake of the Isles
  • Lake Harriet
  • Lake Calhoun / Bde Maka Ska

ZIP codes

55401, 55402, 55403, 55404, 55405, 55406, 55407, 55408, 55409, 55410, 55411, 55412, 55413, 55414, 55415, 55416, 55417, 55418, 55419, 55454, 55455

Response windows

Drive times from our Minneapolis hub

Same-day windows are based on truck position at the time you call. The matrix below reflects typical mid-day response from our 222 E Hennepin hub.

CityDrive timeSame-day cutoff
Minneapolis (city)0–20 minDaily, call before 2pm
St. Paul15–25 minDaily, call before 2pm
Edina15–20 minDaily, call before 2pm
Bloomington20–25 minDaily, call before 1pm
Eden Prairie20–30 minDaily, call before 1pm
Maple Grove20–30 minDaily, call before 1pm
Plymouth20–25 minDaily, call before 1pm
Roseville15–20 minDaily, call before 2pm
Woodbury25–35 minDaily, call before 12pm
Golden Valley10–15 minDaily, call before 2pm

FAQ

Minneapolis questions, answered

  • Can you fix a Bosch E15 or E22 error?

    Yes — E15 is the aquastop flood switch (water in the base tray), E22 is a filter/drain restriction. E15 requires finding the actual leak source (sump gasket, hose clamp, or door seal) before resetting; a quick reset without fixing the leak trips again within a cycle. Both are same-visit repairs, $265–$425 all-in depending on the leak source.

  • Why isn't my dishwasher cleaning even though it runs?

    In Minneapolis this is usually spray-arm bearing wear or limescale from hard water, not a pump failure. We check spray-arm rotation, chopper blade condition, water temperature at the inlet, and detergent-dispenser timing before quoting a pump. A cleaning-service call runs $195–$265; a real pump replacement is $315–$465.

  • Is a leaking dishwasher always the pump?

    No — most Minneapolis leaks are the door bellow/gasket ($225–$295), the sump grommet where the pump mounts ($285–$385), or the fill-hose clamp under the tub. Actual pump-seal leaks are less common. We put dye in the tub during the diagnostic to find the leak path before opening anything up.

  • Do you carry Bosch and KitchenAid parts on the truck?

    Yes — Bosch 300/500/800 drain pumps, door latches, and common control boards; KitchenAid KDPM/KDTE drain pumps, wash-motor kits, and door hinges. Miele G-series pumps are order-in (next-day from the regional distributor). Most single-visit completion rate on dishwashers is ~85%.

  • What warranty comes with the repair?

    Every completed repair is backed by a written 1-year parts-and-labor warranty. If the same fault returns inside that year, we come back and there is no second trip fee and no second diagnostic charge.

  • What brands do you service?

    32 brand specialists — Whirlpool, Maytag, KitchenAid, GE, Samsung, LG, Bosch, Frigidaire, Electrolux, Kenmore, Amana, Speed Queen, plus high-end Sub-Zero, Wolf, Viking, Thermador, Miele, and Dacor. Built-in and pro-style units are quoted at the $189 rate because they take longer to diagnose.

  • Do you charge a trip fee, and is it waived?

    The trip fee is $149 for standard appliances and $189 for built-in or pro-style units. Credited toward the repair when you approve the work. You see the diagnosis and a firm, itemized repair price in writing before any part comes off the truck, so nothing is a surprise at the end.

  • What happens if I decline the repair?

    You pay only the trip fee for the diagnostic visit and keep the written findings — model, failed component, and part cost — so you can weigh a replacement with real numbers. There is no pressure, no restocking charge, and no upsell script.

  • Do you use OEM parts?

    Yes. We fit manufacturer (OEM) parts wherever the brand still supplies them, and we tell you upfront on the rare occasion an OEM part is discontinued and a certified equivalent is the only option. OEM sourcing is why the 1-year warranty is written, not verbal.

Need fridge repair? See our Minneapolis page

Same-day refrigerator repair in Minneapolis — Sub-Zero, Samsung, LG, Whirlpool, KitchenAid. Flat $149 trip fee waived with repair, 1-year warranty on parts and labor.

Book dishwasher repair in Minneapolis

Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.

Brands we service in Minneapolis

Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.