Average Samsung dryer repair cost?

Most Samsung dryer repairs in the Twin Cities land $245–$425 all-in — parts, labor, and the $149 trip fee (which is credited toward the repair when you approve the work). Sealed-system or compressor work runs higher and we always quote that up front. Every job ships with a 1-year written parts-and-labor warranty.

The $149 flat trip fee is credited toward the repair the moment you approve the work, so on any approved dryer repair job in the Twin Cities it effectively disappears into the total. Decline the repair and the $149 covers the in-home visit, full diagnostic, and a written failure analysis you can use elsewhere.

What brands do you service?

45 brand specialists — Whirlpool, Maytag, KitchenAid, GE, Samsung, LG, Bosch, Frigidaire, Electrolux, Kenmore, Amana, Speed Queen, plus high-end Sub-Zero, Wolf, Viking, Thermador, Miele, and Dacor. The trip fee is $149 for all non-commercial appliances, including built-in and pro-style units. Credited toward the repair when you approve the work.

Do you charge a trip fee, and is it waived?

The trip fee is $149 for all non-commercial appliances, including built-in and pro-style units. Credited toward the repair when you approve the work. You see the diagnosis and a firm, itemized repair price in writing before any part comes off the truck, so nothing is a surprise at the end.

SAMSUNG DRYER · REPAIR COST

Samsung Dryer Repair Cost 2026 Twin Cities Pricing by Part & Symptom

Honest flat-rate pricing for Samsung dryer repairs in the Twin Cities — OEM parts, 1-year warranty, $149 trip waived with repair.

4.5★ · 990+
1-Yr Warranty
OEM Parts
Same-Day

(651) 364-7466

$149Trip feeWaived on repair

See brands we service

Same-day windows
Call before 2pm for today's route.
Every Minneapolis ZIP
55401–55455. No trip charge.
EPA 608 certified
Sealed-system & refrigerant work.
1-year warranty
Parts and labor in writing.

Updated June 21, 2026 · Pricing reviewed quarterly

Quick answer

Samsung Dryer Repair — Twin Cities — Quick Answer

Browse the Minneapolis appliance repair hub for pricing, brands, and the full neighborhood list.

What we fix in Minneapolis

The Minneapolis repair mix

Not heating — $285–$425

Heating element or thermal fuse is the usual fix. We always inspect the vent — a blocked vent will pop the same fuse again in weeks.

Squealing / thumping — $245–$385

Idler pulley, belt, or drum rollers. Quoted as a kit because they wear together.

From the truck

Field-service notes on dryer repair

On dryer repair, we keep the diagnostic tight because the failure catalog on this brand is well-documented. Older Twin Cities housing stock (pre-1970 Kenwood, Como, Highland Park, Northeast) frequently has 15A dedicated circuits feeding modern 20A-rated appliances, which shows up as intermittent shutdowns misread as control-board failure.

Because this page focuses on not heating — $285–$425, our tech opens the call by isolating that subsystem before touching anything else. OEM parts get sourced from Marcone, Reliable Parts, and 1st Source — never Amazon or eBay for anything sealed-system, control, or safety-critical. The $149 residential diagnostic is credited toward the repair if you approve; if you don't, you pay only the diagnostic and we leave a written scope. Every completed repair carries a 1-year parts and labor warranty in writing. The section above covers the specific failure surface — heating element or thermal fuse is the usual fix.

We stock the top-30 wear items for this brand on the truck, so roughly 7 in 10 calls finish on the first visit without a parts return trip. We're EPA 608 certified for sealed-system and refrigerant work, licensed and insured in Minnesota, and every tech carries a factory diagnostic laptop for brand-specific service modes. If the model is out of parts support, we'll say so on the first call and refund the diagnostic — that's the honest read on a repair-vs-replace decision, and it's the same read we'd give a family member calling about the same dryer.

Comparison

Samsung Dryer Repair Cost by part (2026)

All-in pricing — OEM parts, labor, 1-year written warranty. $149 trip fee waived when you approve the repair.

Part / repair	All-in cost
Heating element	$285–$425
Thermal fuse / hi-limit	$185–$285
Idler pulley + belt	$245–$345
Drum rollers	$285–$385
Moisture sensor	$185–$285
Door switch	$185–$245
Main control board	$385–$585
Vent cleaning	$185–$245

FAQ

Minneapolis questions, answered

Average Samsung dryer repair cost?
Most Samsung dryer repairs in the Twin Cities land $245–$425 all-in — parts, labor, and the $149 trip fee (which is credited toward the repair when you approve the work). Sealed-system or compressor work runs higher and we always quote that up front. Every job ships with a 1-year written parts-and-labor warranty.
Diagnostic fee?
The $149 flat trip fee is credited toward the repair the moment you approve the work, so on any approved dryer repair job in the Twin Cities it effectively disappears into the total. Decline the repair and the $149 covers the in-home visit, full diagnostic, and a written failure analysis you can use elsewhere.
What brands do you service?
45 brand specialists — Whirlpool, Maytag, KitchenAid, GE, Samsung, LG, Bosch, Frigidaire, Electrolux, Kenmore, Amana, Speed Queen, plus high-end Sub-Zero, Wolf, Viking, Thermador, Miele, and Dacor. The trip fee is $149 for all non-commercial appliances, including built-in and pro-style units. Credited toward the repair when you approve the work.
Do you charge a trip fee, and is it waived?
The trip fee is $149 for all non-commercial appliances, including built-in and pro-style units. Credited toward the repair when you approve the work. You see the diagnosis and a firm, itemized repair price in writing before any part comes off the truck, so nothing is a surprise at the end.

Related Minneapolis repair pages

Book dryer repair in Minneapolis

Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.

(651) 364-7466Contact us →

Brands we service in Minneapolis

Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.