GE Dishwasher Not Draining Standing Water at Cycle End — DIY Fix Then Call
GE dishwasher (GDT, GDF, PDT, CDT, ZDT) with standing water at the end of the cycle is the #1 GE dishwasher call we get. 60% of the time it's a clog you can clear in 15 minutes; the rest is a drain pump or, on Profile/Café, the drain-valve solenoid.
- 4.5★ · 990+
- 1-Yr Warranty
- OEM Parts
- Same-Day
Same-day windows
Call before 2pm for today's route.
Every Minneapolis ZIP
55401–55455. No trip charge.
EPA 608 certified
Sealed-system & refrigerant work.
1-year warranty
Parts and labor in writing.
Updated June 21, 2026 · Reviewed by service manager
Quick answer
GE Dishwasher Drain Repair — Twin Cities — Quick Answer
Looking for the broader appliance repair Minneapolis hub? It covers every ZIP, brand, and appliance we service.
What we fix in Minneapolis
The Minneapolis repair mix
Owner-serviceable: filter, hose loop, disposal knockout
Filter clog is the #1 cause — unscrew the cylindrical assembly at the bottom-rear of the tub, rinse under the tap, reinstall. Hose loop: the drain hose must rise to a high loop under the sink or to an air gap on the countertop, otherwise dirty sink water back-siphons. Disposal knockout: when a dishwasher drain is connected to a brand-new disposal, the knockout plug inside the disposal nipple must be punched out — common miss on new installs.
Drain pump / drain-valve solenoid
If clog checks are clean, GE's drain pump (most models) or drain-valve solenoid (some Profile/Café reverse-rotation pumps) failed. We test current draw and impeller spin before swapping. $245–$425 OEM.
GE dishwasher repair in the Twin Cities
We stock GE dishwasher drain pumps, drain solenoids, wash pumps, control boards, door latches, and filter assemblies on the truck. About 88% of GE dishwasher calls finish first visit. 1-year written warranty.
Coverage
Minneapolis neighborhoods we cover
Same-day service routes through every Minneapolis ZIP — no separate trip charge anywhere inside city limits.
Neighborhood deep-dives
Neighborhoods
- Uptown
- Northeast Minneapolis
- Downtown
- North Loop
- Mill District
- Powderhorn
- Longfellow
- Linden Hills
- Kingfield
- Lyn-Lake
- Lyndale
- Whittier
- Loring Park
- Cedar-Riverside
- Marcy-Holmes
- Como
- Phillips
- Standish-Ericsson
- Seward
- Prospect Park
- Nokomis
- Bryn Mawr
- Fulton
- Tangletown
- Armatage
- Windom
- Diamond Lake
- Audubon Park
- Sheridan
- St. Anthony East
- St. Anthony West
- Logan Park
- Holland
- Columbia Park
- Waite Park
- Webber-Camden
- Folwell
- Jordan
- Hawthorne
- Near North
- Harrison
- Cedar-Isles-Dean
- East Isles
- ECCO
- Lowry Hill
- Lowry Hill East
- Stevens Square
- Elliot Park
- Kenwood
- Lake of the Isles
- Lake Harriet
- Lake Calhoun / Bde Maka Ska
ZIP codes
55401, 55402, 55403, 55404, 55405, 55406, 55407, 55408, 55409, 55410, 55411, 55412, 55413, 55414, 55415, 55416, 55417, 55418, 55419, 55454, 55455
Response windows
Drive times from our Minneapolis hub
Same-day windows are based on truck position at the time you call. The matrix below reflects typical mid-day response from our 222 E Hennepin hub.
| City | Drive time | Same-day cutoff |
|---|---|---|
| Minneapolis (city) | 0–20 min | Daily, call before 2pm |
| St. Paul | 15–25 min | Daily, call before 2pm |
| Edina | 15–20 min | Daily, call before 2pm |
| Bloomington | 20–25 min | Daily, call before 1pm |
| Eden Prairie | 20–30 min | Daily, call before 1pm |
| Maple Grove | 20–30 min | Daily, call before 1pm |
| Plymouth | 20–25 min | Daily, call before 1pm |
| Roseville | 15–20 min | Daily, call before 2pm |
| Woodbury | 25–35 min | Daily, call before 12pm |
| Golden Valley | 10–15 min | Daily, call before 2pm |
FAQ
Minneapolis questions, answered
Why is there standing water in my GE dishwasher?
Clog (filter, hose loop, disposal knockout) in 60% of cases. Drain pump or drain-valve solenoid in the remaining 40%. Leak source identification is the first 15 minutes of the visit — door seal, drain pump, water inlet valve, or supply line. Bring the model number to the call so we arrive with the most likely OEM part on the truck.
What is the disposal knockout plug?
When a dishwasher drain hose connects to a new garbage disposal, the knockout plug inside the disposal's dishwasher nipple must be removed (a screwdriver tap through the nipple). Skipping this on a new install causes immediate 'won't drain' complaints.
Do I really need a high loop?
Yes (or an air-gap fitting). The drain hose must rise to a high loop under the sink so dirty disposal/sink water can't back-siphon into the dishwasher tub.
How much does GE dishwasher drain pump replacement cost?
Most GE dishwasher repairs in the Twin Cities land $245–$425 all-in — parts, labor, and the $149 trip fee (which is credited toward the repair when you approve the work). Sealed-system or compressor work runs higher and we always quote that up front. Every job ships with a 1-year written parts-and-labor warranty.
Related Minneapolis repair pages
What will this cost?
Pricing & repair-cost pages
Trying to decide repair vs. replace? These pages break down real all-in Twin Cities pricing by brand, model class, and failure mode.
Need fridge repair? See our Minneapolis page
Same-day refrigerator repair in Minneapolis — Sub-Zero, Samsung, LG, Whirlpool, KitchenAid. Flat $149 trip fee waived with repair, 1-year warranty on parts and labor.
Book dishwasher repair in Minneapolis
Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.
Brands we service in Minneapolis
Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.