CMN Appliance
SUB-ZERO · WASHER

Sub-Zero Washer Repair — Same Day Service.

When your Sub-Zero washer acts up, you don't need a generalist — you need a tech who's pulled the back panel off popular Sub-Zero units like the BI-36U Built-In Bottom Freezer, the BI-48S Side-by-Side, the IT-36CIID Integrated Column a hundred times. We run same-day routes across the Twin Cities and Central MN with OEM Sub-Zero parts on every truck and a flat $129 diagnostic that's fully waived when you approve the repair.

4.5★ · 990+1-Yr WarrantyOEM PartsSame-Day
(651) 364-7466
  • Same-day

    Book before 2pm weekdays.

  • OEM Sub-Zero

    Stocked on every truck.

  • 1-yr warranty

    Parts & labor in writing.

  • Twin Cities + MN

    Daily routes statewide.

Why a Sub-Zero specialist matters for washer repair

Sub-Zero washers have specific failure patterns we see on every route. Built-in luxury refrigeration — sealed system specialists on staff. The diagnostic shortcuts that work on a Whirlpool don't apply to a Sub-Zero — error codes are different, sensor placements are different, and the OEM parts catalog is its own beast. Our techs spend their first 30 days learning Sub-Zero-specific service bulletins and the most-failed components for popular Sub-Zero units like the BI-36U Built-In Bottom Freezer, the BI-48S Side-by-Side, the IT-36CIID Integrated Column.

If you've called a generalist before and gotten "we'll have to order the part and come back" — that's the call we exist to prevent. Every truck in our fleet carries the top Sub-Zero washer parts: control boards, sensors, gaskets, valves, and the brand-specific consumables that mainstream supply houses don't stock.

Sub-Zero models we service

We cover essentially every Sub-Zero washer from the last 15 years across the Twin Cities and Central MN. The names below are the units we see most often — if yours isn't listed, call before you assume we don't cover it. We almost certainly do.

Most-serviced Sub-Zero models: BI-36U Built-In Bottom Freezer; BI-48S Side-by-Side; IT-36CIID Integrated Column; UC-24R Undercounter Refrigerator.

Common repairs

Common Sub-Zero washer repairs

Sub-Zero washer won't drain

90% of 'won't drain' calls trace back to a clogged drain pump filter, a kinked drain hose, or a coin/bra-wire stuck in the pump.

Cost
$169–$280
Time
45–75 minutes

Sub-Zero washer leaking water

Front-load leaks usually point at the door gasket. Top-load leaks point at fill hoses, the tub seal, or the drain pump housing.

Cost
$179–$340
Time
60–90 minutes

Sub-Zero washer won't spin

Drum locked, lid switch failure, broken drive belt, or a worn motor coupler — we diagnose all four on the first visit.

Cost
$189–$360
Time
60–90 minutes

Sub-Zero drum bearings & noise

Loud rumbling or thumping during the spin cycle is almost always tub bearings going out. We rebuild instead of replacing the whole washer.

Cost
$320–$520
Time
2–3 hours

Sub-Zero control board & error codes

Flashing error codes (LE, OE, dE on LG; SUDS, SUD on Samsung; F-codes on Whirlpool) usually point at a sensor or board. We carry the common boards on the truck.

Cost
$229–$420
Time
60–90 minutes

Service areas

Sub-Zero washer repair where you live

More Sub-Zero repair

Other Sub-Zero appliances we service

FAQ

Sub-Zero washer repair questions

How much does Sub-Zero washer repair cost?+

Most Sub-Zero washer repairs land between $189 and $480 all-in (parts + labor) with our 1-year written warranty. The flat diagnostic — $129 standard, $149 fridges, $179 built-ins — is fully waived when you approve the repair. We give you the firm number before any wrench turns.

Do you use genuine OEM Sub-Zero parts?+

Yes — every truck is stocked with OEM Sub-Zero parts for the most-failed components. We do not substitute aftermarket parts on warranty repairs and we'll always tell you in writing if a part is OEM versus an authorized equivalent.

How fast can you get a tech out for Sub-Zero washer repair?+

Calls placed before 2pm on a weekday typically get a same-day window. Our techs run daily routes through the Twin Cities and Central MN with OEM Sub-Zero parts on board, and they text live ETA on the way.

What's the most common Sub-Zero washer failure you see?+

Coin or hair clip jammed in the drain pump impeller. accounts for the largest share of our Sub-Zero washer calls. Typical fix is $169–$280 all-in, 45–75 minutes of shop time, with the OEM Sub-Zero part already on the truck.

Is your Sub-Zero washer repair work warrantied?+

Every completed Sub-Zero washer repair carries a 1-year parts-and-labor warranty in writing. Same failure inside the year, we come back free of charge — no trip fee, no diagnostic.

Do you service Sub-Zero washers in apartments, condos, and rentals?+

Yes — we work with renters, owners, and property managers across the Twin Cities and Central MN. We carry COI on request and have years of experience with high-rise buildings, freight elevators, and after-hours scheduling.

How much does Sub-Zero washer drain pump repair cost?+

Sub-Zero washer won't drain typically runs $169–$280 all-in (parts and labor) with a 1-year written warranty. Coin or hair clip jammed in the drain pump impeller. OEM Sub-Zero part on the truck, about 45–75 minutes of shop time on a routine job.

How much does Sub-Zero washer leak repair repair cost?+

Sub-Zero washer leaking water typically runs $179–$340 all-in (parts and labor) with a 1-year written warranty. Torn front-load door boot gasket. OEM Sub-Zero part on the truck, about 60–90 minutes of shop time on a routine job.

Book Sub-Zero washer repair today

Same-day windows when you call before 2pm weekdays.

(651) 364-7466