Central Minnesota Appliance RepairCMN Appliance
KITCHENAID STAND MIXER · REPAIR

KitchenAid Stand Mixer Repair Worm Gear, Grease Repack, Speed Control — Twin Cities Service

KitchenAid stand mixers (Artisan, Classic, Professional 5/6, Pro 600, Pro Line) are designed for 30-year service lives — and they will last that long if you replace the worm gear when it wears and repack the grease every 10 years. We service all generations at our Twin Cities shop or in-home.

  • 4.5★ · 990+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
(651) 364-7466
$149Trip feeWaived on repair
See brands we service

  • Same-day windows

    Call before 2pm for today's route.

  • Every Minneapolis ZIP

    55401–55455. No trip charge.

  • EPA 608 certified

    Sealed-system & refrigerant work.

  • 1-year warranty

    Parts and labor in writing.

Updated June 21, 2026 · Reviewed by service manager

Quick answer

KitchenAid Stand Mixer Repair — Twin Cities — Quick Answer

Looking for the broader appliance repair Minneapolis hub? It covers every ZIP, brand, and appliance we service.

What we fix in Minneapolis

The Minneapolis repair mix

Worm gear — the #1 repair

KitchenAid designs a sacrificial nylon worm gear that strips when you jam the mixer (dropped utensil, frozen butter, dough too stiff). This protects the motor — it's a design feature, not a defect. Symptoms: gnashing noise, beater spins free, motor still runs. Gear swap takes 60–90 minutes. We carry the OEM gear and food-grade grease.

Grease repack

The planetary gearbox is packed with food-safe grease at the factory. After 8–12 years (or after a worm-gear job), the grease breaks down — it leaks out the bottom of the planetary onto your countertop, or smokes on the motor when the mixer runs hot. Drain, clean, repack with OEM grease.

Speed control board

If your mixer runs only at high speed, pulses, or won't change speeds, the phase-control board failed. $185–$285 installed.

Where we service

Most KitchenAid mixer repairs are best done at our shop — easier to fully disassemble, clean, and re-grease on a bench. We do in-home for $149 trip + repair if you can't bring it in.

From the truck

Field-service notes on small appliance repair

On small appliance repair, we keep the diagnostic tight because the failure catalog on this brand is well-documented. The Twin Cities humidity swing — dry January to sticky July — cycles refrigerator door gaskets hard; a gasket that seals in March can pull ambient air by August and drive up compressor run time 15–20%.

Because this page focuses on worm gear — the #1 repair, our tech opens the call by isolating that subsystem before touching anything else. OEM parts get sourced from Marcone, Reliable Parts, and 1st Source — never Amazon or eBay for anything sealed-system, control, or safety-critical. The $149 residential diagnostic is credited toward the repair if you approve; if you don't, you pay only the diagnostic and we leave a written scope. Every completed repair carries a 1-year parts and labor warranty in writing. The section above covers the specific failure surface — kitchenaid designs a sacrificial nylon worm gear that strips when you jam the mixer (dropped utensil, frozen butter, dough too stiff).

We stock the top-30 wear items for this brand on the truck, so roughly 7 in 10 calls finish on the first visit without a parts return trip. We're EPA 608 certified for sealed-system and refrigerant work, licensed and insured in Minnesota, and every tech carries a factory diagnostic laptop for brand-specific service modes. If the model is out of parts support, we'll say so on the first call and refund the diagnostic — that's the honest read on a repair-vs-replace decision, and it's the same read we'd give a family member calling about the same small appliance.

Coverage

Minneapolis neighborhoods we cover

Same-day service routes through every Minneapolis ZIP — no separate trip charge anywhere inside city limits.

Neighborhood deep-dives

Neighborhoods

  • Uptown
  • Northeast Minneapolis
  • Downtown
  • North Loop
  • Mill District
  • Powderhorn
  • Longfellow
  • Linden Hills
  • Kingfield
  • Lyn-Lake
  • Lyndale
  • Whittier
  • Loring Park
  • Cedar-Riverside
  • Marcy-Holmes
  • Como
  • Phillips
  • Standish-Ericsson
  • Seward
  • Prospect Park
  • Nokomis
  • Bryn Mawr
  • Fulton
  • Tangletown
  • Armatage
  • Windom
  • Diamond Lake
  • Audubon Park
  • Sheridan
  • St. Anthony East
  • St. Anthony West
  • Logan Park
  • Holland
  • Columbia Park
  • Waite Park
  • Webber-Camden
  • Folwell
  • Jordan
  • Hawthorne
  • Near North
  • Harrison
  • Cedar-Isles-Dean
  • East Isles
  • ECCO
  • Lowry Hill
  • Lowry Hill East
  • Stevens Square
  • Elliot Park
  • Kenwood
  • Lake of the Isles
  • Lake Harriet
  • Lake Calhoun / Bde Maka Ska

ZIP codes

55401, 55402, 55403, 55404, 55405, 55406, 55407, 55408, 55409, 55410, 55411, 55412, 55413, 55414, 55415, 55416, 55417, 55418, 55419, 55454, 55455

Response windows

Drive times from our Minneapolis hub

Same-day windows are based on truck position at the time you call. The matrix below reflects typical mid-day response from our 222 E Hennepin hub.

CityDrive timeSame-day cutoff
Minneapolis (city)0–20 minDaily, call before 2pm
St. Paul15–25 minDaily, call before 2pm
Edina15–20 minDaily, call before 2pm
Bloomington20–25 minDaily, call before 1pm
Eden Prairie20–30 minDaily, call before 1pm
Maple Grove20–30 minDaily, call before 1pm
Plymouth20–25 minDaily, call before 1pm
Roseville15–20 minDaily, call before 2pm
Woodbury25–35 minDaily, call before 12pm
Golden Valley10–15 minDaily, call before 2pm

FAQ

Minneapolis questions, answered

  • Is a KitchenAid mixer worth repairing?

    Almost always. A $185–$285 repair on a $450–$700 mixer with 20+ years of designed life is a no-brainer. New mixers are not built any tougher than yours.

  • What is the worm gear?

    A sacrificial nylon gear KitchenAid uses to protect the motor from jams. When you over-stress the mixer, the worm gear strips instead of frying the motor. By design, this is the part that should fail.

  • How often should I re-grease my mixer?

    Every 8–12 years of regular use, or any time you do a worm-gear repair. Old grease leaks out the planetary or smokes on the motor.

  • Can I drop my mixer off at your shop?

    Yes — most mixer repairs are easier on a bench. Call (651) 364-7466 to schedule a shop drop-off; turnaround is usually 3–7 days.

  • How much does KitchenAid mixer repair cost?

    Most KitchenAid small appliance repairs in the Twin Cities land $185–$245 all-in — parts, labor, and the $149 trip fee (which is credited toward the repair when you approve the work). Sealed-system or compressor work runs higher and we always quote that up front. Every job ships with a 1-year written parts-and-labor warranty.

Related Minneapolis repair pages

Need fridge repair? See our Minneapolis page

Same-day refrigerator repair in Minneapolis — Sub-Zero, Samsung, LG, Whirlpool, KitchenAid. Flat $149 trip fee waived with repair, 1-year warranty on parts and labor.

Book small appliance repair in Minneapolis

Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.

(651) 364-7466Contact us →

Brands we service in Minneapolis

Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.