LG RANGE · ERROR CODES

LG Range & Oven Error Codes F-9, F-19, F-3, F-4, F-7 — What They Mean & How We Fix Them

LG electric, gas, and induction ranges (LRE, LRG, LSE, LSG, LDE, LDG, LSIL series) display F-codes on the digital panel. The Twin Cities calls we see most are F-9 (oven not reaching temp), F-3 / F-4 (oven temp sensor), and F-7 (keypad short).

  • 4.5★ · 990+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
(651) 364-7466
$149Trip feeWaived on repair
See brands we service
  • Same-day windows

    Call before 2pm for today's route.

  • Every Minneapolis ZIP

    55401–55455. No trip charge.

  • EPA 608 certified

    Sealed-system & refrigerant work.

  • 1-year warranty

    Parts and labor in writing.

Updated June 21, 2026 · Reviewed by service manager

Quick answer

LG Range Error Code Repair — Twin Cities — Quick Answer

This is one of our Minneapolis appliance repair service pages — see the hub for pricing and coverage details.

What we fix in Minneapolis

The Minneapolis repair mix

F-9 — oven not heating to setpoint

Electric: bake element open ($245–$365) or relay on the main board failed. Gas: igniter weak (resistance climbs as the igniter ages and it stops opening the gas valve) — replace the igniter, $285–$425. F-9 with sealed-burner cooktop working fine = oven-circuit only, not a supply issue.

F-3 / F-4 — oven temp sensor

F-3 = sensor short; F-4 = sensor open. RTD probe at the back of the oven cavity. Cheap swap, $245–$345 all-in.

LG range repair in the Twin Cities

We stock LG bake and broil elements, oven temp sensors, gas igniters, spark modules, convection fan motors, door latch motors, hinges, induction generators, touch panels, and main control boards on the truck. 1-year written warranty.

From the truck

Field-service notes on oven repair

On oven repair, we keep the diagnostic tight because the failure catalog on this brand is well-documented. The Twin Cities humidity swing — dry January to sticky July — cycles refrigerator door gaskets hard; a gasket that seals in March can pull ambient air by August and drive up compressor run time 15–20%.

Because this page focuses on f-9 — oven not heating to setpoint, our tech opens the call by isolating that subsystem before touching anything else. Wear parts (belts, pumps, igniters, valves) ship from our truck stock; boards and sealed-system parts are OEM-only from Marcone or the manufacturer's direct distributor. The $149 residential diagnostic is credited toward the repair if you approve; if you don't, you pay only the diagnostic and we leave a written scope. Every completed repair carries a 1-year parts and labor warranty in writing. The section above covers the specific failure surface — electric: bake element open ($245–$365) or relay on the main board failed.

We stock the top-30 wear items for this brand on the truck, so most first-visit repairs close same-day. We're EPA 608 certified for sealed-system and refrigerant work, licensed and insured in Minnesota, and every tech carries a factory diagnostic laptop for brand-specific service modes. If the model is out of parts support, we'll say so on the first call and refund the diagnostic — that's the honest read on a repair-vs-replace decision, and it's the same read we'd give a family member calling about the same oven.

FAQ

Minneapolis questions, answered

  • What does F-9 mean on an LG oven?

    F-9 = oven didn't reach setpoint in the expected time. Electric: bake element ($245–$365) or main board relay. Gas: weak igniter ($285–$425) is by far the most common cause.

  • What does F-3 or F-4 mean on an LG oven?

    F-3 = oven temp sensor short. F-4 = sensor open. Cheap swap of the RTD probe at the back of the oven cavity, $245–$345. The control board logs this code so technicians can skip generic troubleshooting. We carry the OEM service manuals on tablet for every major platform — no guess-and-replace.

  • What does F-7 mean on an LG range?

    F-7 = keypad shorted or button stuck. Try a 5-minute unplug; if F-7 returns, the touch panel needs replacement, $325–$525. The control board logs this code so technicians can skip generic troubleshooting. We carry the OEM service manuals on tablet for every major platform — no guess-and-replace.

  • How much does LG range repair cost?

    Most LG range repairs land $245–$525 all-in. Bake element $245–$365. Gas igniter $285–$425. Oven sensor $245–$345. Door latch $245–$385. Touch panel / main board $325–$525. The $149 trip fee is waived when you approve the repair.

What will this cost?

Pricing & repair-cost pages

Trying to decide repair vs. replace? These pages break down real all-in Twin Cities pricing by brand, model class, and failure mode.

Book oven repair in Minneapolis

Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.

Brands we service in Minneapolis

Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.