APPLIANCE REPAIR · ELLSWORTH, WI

Appliance Repair in Ellsworth, WI

Same-Day Service

We repair kitchen and laundry appliances at homes in Ellsworth, WI 54011. Call with your address, appliance brand and symptom for an appointment.

Updated November 20, 2026

Ellsworth, WI service area

We cover Ellsworth in ZIP code 54011 and the adjoining Town of Ellsworth. There is no Wisconsin surcharge: the trip fee is $149 for any home appliance, waived when you approve the repair. You can phone (651) 364-7466 or book through our contact page.

Map of Ellsworth, WI appliance repair service areaOpen in Google Maps

Who to call, and where we work, in Pierce County

When you book, give us your street or road and tell us whether you live in the village or the Town of Ellsworth, along with the nearest cross road and any long driveway, so we can plan the visit.

Service calls cover refrigerators, washers, dryers and dishwashers. The appliance repair cost guide covers what repairs usually cost.

Ellsworth, WI appliance repair FAQs

  • What appliance repairs do you handle?

    Refrigerators, freezers, ice makers, washers, dryers, dishwashers, ovens, ranges, cooktops and microwaves are all on our repair list here. Tell us the brand and the symptom when you call, and we plan the visit around it. Standalone freezers and wine coolers are covered too.

  • How do I book a repair near the Pierce County Courthouse?

    Book by calling (651) 364-7466 between 7am and 9pm, or by using the contact page. Give us your 54011 address, whether you are in the village or the Town of Ellsworth, and the nearest highway or cross road. You get an arrival window, and we confirm the appliance and its problem.

  • Is there a travel fee for Ellsworth?

    Wisconsin addresses like Ellsworth pay the same $149 trip fee as Minnesota homes. It is waived when you approve the repair, with a written price first, and there is no mileage or river-crossing add-on.

  • Do you serve the Town of Ellsworth and rural roads?

    Yes. We serve the Town of Ellsworth and rural addresses around the village at the same $149 trip fee. Give us the road name, the nearest cross road and any gate or long driveway when you book, so the technician knows how to reach the house.

  • Do repairs in Ellsworth include a warranty?

    Yes, a Ellsworth repair comes with 1 year of parts and labor coverage in writing. Should the repair fail during that year, contact the office on (651) 364-7466 and we will arrange to come back and look at it.

Spring Valley, Plum City, Bay City and Beldenville are other Pierce County pages, and River Falls is the larger city nearby.

Book appliance repair in Ellsworth today

Need a visit? Ring (651) 364-7466 daily, 7am to 9pm, or use the contact form with your Ellsworth address. Repairs we finish come with a 1-year warranty on parts and labor.

Power quality, breakers and appliance control boards

Modern appliances run on electronic control boards, and boards dislike unstable power. A rural line that sags, spikes or drops out can leave a refrigerator, washer or range with a board that resets, shows a code or fails outright. Before you pay for a board, it is worth ruling out the supply.

A breaker that trips once and resets is a different problem from one that trips every time. A dryer or range uses a double-pole breaker, and one half can trip while the appliance still half-works, so a dryer that spins but does not heat may be a breaker problem rather than an element.

Electrical checks before a repair visit

Most of these are quick checks.

  1. Look at the breaker panel. Find the breaker for the appliance and reset it once. A breaker that trips again immediately means stop and leave it off.
  2. Check the outlet and the plug. A plug that feels hot or is discolored needs attention. Do not use an extension cord with a large appliance.
  3. Note any recent power events. Storms, outages or lightning near your address can damage boards. Tell us about them.
  4. Unplug and wait. Unplug the appliance for a few minutes, then restart it. A one-time glitch may clear, and a code that returns is a real fault.
  5. Consider surge protection. A plug-in surge protector rated for the appliance, or a whole-house protector fitted by an electrician, limits damage from spikes.

What we test on a suspected board fault

We test the supply at the appliance, then the board's outputs, sensors and connections, before recommending a replacement. A board is often blamed for a fault that sits in a sensor or a connector. Our refrigerator repair and washer repair pages describe the other faults we find.

Central Minnesota Appliance Repair · Independent appliance repair since 2009 · Open daily 7am to 9pm · (651) 364-7466 · 222 E Hennepin Ave, Minneapolis