Frigidaire Dishwasher Error Codes
i20, i30 & Blink Codes — What They Mean & How We Fix Them
Frigidaire and Frigidaire Gallery / Professional dishwashers (FFCD, FFBD, FGID, FPID, FGCD series) show fault codes as an i-number on the display or as a blink pattern on the cycle lights. The Twin Cities calls we see most are i20 (drain) and i30 (leak in the base pan).
- 4.5★ · 900+
- 1-Yr Warranty
- OEM Parts
- Same-Day
Same-day windows
Call early for a same-day route.
Serving the Twin Cities
$149 trip fee, credited to repair.
EPA 608 certified
Sealed-system & refrigerant work.
1-year warranty
Parts and labor in writing.
Quick answer
Frigidaire Dishwasher Error Code Repair — Twin Cities — Quick Answer
What we fix in the Twin Cities
The Twin Cities repair mix
How Frigidaire displays codes
Most Frigidaire dishwashers don't have a numeric display — codes appear as a blink pattern on the cycle LEDs. Count the blinks in each group, pause between groups, and match the pattern to the fault list in your owner's manual; the model number is on the tub edge inside the door. Newer Gallery / Professional models with a display show the i-code directly.
i20 — drain code
Standard dishwasher drain order: disposal knockout plug still in place (free fix), clogged sump filter, drain hose kinked or clogged, drain pump impeller jammed by broken glass or label paper. Frigidaire drain pumps are inexpensive — $215–$345 all-in if it's the pump.
i30 — leak in the base pan
Water in the base pan tripped the leak float. Common leak paths on Frigidaire: the door gasket (especially the bottom corners), the sump-to-tub gasket, and the supply hose connection at the back. We find the leak, replace the leaking part, and verify two cycles. $245–$485 all-in.
Frigidaire dishwasher repair in the Twin Cities
We stock Frigidaire inlet valves, drain pumps, wash motors, sump filters, door gaskets, latch assemblies, thermistors, heating elements, and the common Frigidaire control boards on the truck. 1-year written warranty.
Need appliance repair in the Twin Cities? Call 7am–9pm, every day.
FAQ
Dishwasher repair in the Twin Cities: FAQs
What does i20 mean on a Frigidaire dishwasher?
i20 = a drain problem — sump filter, hose, disposal knockout plug, or drain pump. Check the disposal knockout plug first if the dishwasher is hooked to a new disposal. A clogged filter or a forgotten knockout plug is often an easy fix.
What does i30 mean on a Frigidaire dishwasher?
i30 = leak detector tripped. Water reached the base-pan float. Find and seal the leak — usually the door gasket or sump-to-tub gasket. $245–$485 all-in.
How do I read Frigidaire dishwasher error codes?
Many Frigidaire dishwashers blink the code on the cycle lights instead of showing a number; the steps for reading the pattern are in the section above. Gallery / Professional models with a display show the i-code directly.
How much does Frigidaire dishwasher repair cost?
Most Frigidaire dishwasher repairs land $225–$425 all-in. Drain pump $215–$345. Inlet valve $215–$285. Leak repair $245–$485. Wash motor $325–$485. Control board $285–$425. The $149 trip fee is credited toward the repair when you approve it.
Related repair pages
- Frigidaire appliance repair (hub) →
- Frigidaire refrigerator error codes →
- Bosch dishwasher error codes →
- GE dishwasher error codes →
- KitchenAid dishwasher error codes →
- Whirlpool dishwasher error codes →
- LG dishwasher error codes →
- Samsung dishwasher error codes →
- Dishwasher repair Minneapolis →
- Appliance repair Minneapolis (hub) →
- Refrigerator repair Minneapolis →
- Washer repair Minneapolis →
- Dryer repair Minneapolis →
- Oven repair Minneapolis →
What will this cost?
Pricing & repair-cost pages
Trying to decide repair vs. replace? These pages break down real Twin Cities pricing by brand, model class, and failure mode.
Book dishwasher repair in the Twin Cities
Have your model and serial number handy. Call early and we can often get you a same-day window across the Twin Cities.
Frigidaire dishwasher codes: meaning and what we check
Frigidaire often shows its codes with an i prefix on the display or as a blink pattern on the cycle lights. We list the two codes we are confident about, and keep the rest as symptoms. Check your owner's manual for other codes.
| Code or symptom | What it means | What we check |
|---|---|---|
| i20 | Drain problem | Filter, drain hose, disposal knockout plug, drain pump |
| i30 | Leak or water in the base | Door gasket, hoses, pump and sump seals, base for water |
| Will not fill | Water is not reaching the tub | Supply valve, inlet screen, inlet valve |
| Lights blink, cycle will not run | A stored fault or a door signal problem | Count the blink pattern; latch, switch and control |
| Water does not heat | The heating circuit is not working | Heating element, thermistor, wiring |
Prices on this page: most Frigidaire dishwasher repairs $225 to $425 all-in, leak repairs $245 to $485. The $149 trip fee is credited toward the repair when you approve it.
How should I read an i30 leak code on a Frigidaire?
i30 means the dishwasher has detected water in its base pan, which is the sign of a leak or overflow. Shut off the water supply and the power, then look for water in the tub and the cabinet. Do not run another cycle until you know where it came from. We cover this code further on our Frigidaire i30 error page.
The usual sources are the door gasket, a hose clamp, a pump seal or an inlet valve that does not close. Using the wrong detergent can also foam over into the base. If the base is wet and you cannot find the source, call us.
How do I fix an i20 drain code at home?
Start with the safe checks. Turn off the power at the breaker. Remove the lower rack and the filter, and rinse the filter in warm water. Look into the sump for a bit of glass, a label or a seed. Check the drain hose behind the toe-kick for kinks, and confirm that the knockout plug was removed if a garbage disposal was installed.
Run a rinse cycle and see if the water leaves. If the sink above backs up too, the problem is in the household plumbing, which is a plumber's job. If everything is clear and i20 returns, the drain pump is the next suspect. See dishwasher not draining.
Is a Frigidaire dishwasher worth repairing?
In most cases, yes, for a pump, valve, gasket or latch. Central Minnesota Appliance Repair gives a written quote before ordering parts, and the trip fee is credited. Approved work carries a one-year written parts-and-labor warranty. See Frigidaire appliance repair and the dishwasher repair cost guide.
More questions about Frigidaire dishwasher codes
Can I read Frigidaire blink codes without a display?
Count the blinks in each group, pause between groups and note the pattern. Your manual maps patterns to faults. Photograph or film the lights before you reset.
Why does my Frigidaire dishwasher smell bad after a drain code?
Standing water in the sump lets food residue spoil. Clear the drain, clean the filter and run a hot cycle with a dishwasher cleaner.
Should I use rinse aid in a dishwasher that leaks?
Use only the amount the dishwasher calls for. Overfilling the dispenser can leave residue and suds. The leak itself needs finding.
Where is the Frigidaire model number?
Along the tub edge inside the door. Photograph it for the call.