Speed Queen Dryer Repair in Minneapolis & St. Paul
A dryer that will not heat, will not start, or leaves clothes damp. We repair Speed Queen home dryers across the Twin Cities, open 7am to 9pm every day, for a $149 trip fee credited toward the repair when you approve it.
Who repairs Speed Queen dryers in Minneapolis and St. Paul?
Central Minnesota Appliance Repair repairs Speed Queen home dryers in Minneapolis, St. Paul and the suburbs. Typical calls are a dryer that runs but does not heat, one that will not start, and one that takes too long to dry. The $149 trip fee is credited toward the repair when you approve it. Every completed repair is backed by a written 1-year parts-and-labor warranty.
Which Speed Queen dryer do you have?
Speed Queen's own site lists dryers alongside its top load and front load washers and its stacked washer-dryers. What matters for repair is the heat source. An electric dryer heats with an element on a 240 volt circuit. A gas dryer heats with a burner, and it needs a gas supply and an ignition system as well as power. A stacked unit puts the dryer above a washer, which changes access and how it vents.
Check the data tag for the model and serial number, and send us a photo when you book. Where the tag sits depends on the dryer, so the owner's manual is the best guide. If your problem is a washer, see Speed Queen washer repair.
Why won't my Speed Queen dryer heat, start or turn?
These are the dryer problems we are called for most. The last column says what is safe for you to try and what should wait for a technician.
| Symptom | Likely cause | You or a pro? |
|---|---|---|
| Runs but does not heat | Heating element, thermal fuse or sensor on an electric dryer. Igniter or gas valve on a gas dryer | You: check the breaker and the lint screen. Pro for the heat parts |
| Heats but clothes stay damp | Restricted exhaust: full lint screen, crushed duct or a blocked outside flap | You: clean the lint screen and check the vent hood outside. Pro for the duct |
| Will not start | Door switch, start control or a tripped breaker | You: close the door firmly and check the breaker. Pro for the switch |
| Drum will not turn | Worn belt or idler, or a motor problem | Pro. Do not run the dryer with the drum stuck |
| Shuts off before the cycle ends | Overheating from a restricted vent, or a sensor fault | You: clear the lint screen and vent. Pro if it repeats |
| Loud squeal or thump | Worn roller, idler or drum support | Pro |
| Burning smell | Lint buildup around the heat source | Stop using it, switch off the breaker, and call us |
If you smell gas near a gas dryer, leave the house, do not touch a switch, and call your gas utility or 911 from outside.
What should I check before I call about my Speed Queen dryer?
These steps keep you away from live wiring and gas parts.
- Stop the dryer and let it cool. If you smell burning, switch off the breaker and do not run it again.
- Clean the lint screen. Pull it out and clear it by hand. A full screen cuts airflow and is the most common cause of long dry times.
- Check the breaker. An electric dryer uses a double 240 volt breaker. If it tripped, reset it once. If it trips again, leave it off and call us.
- Look at the outside vent hood. Make sure the flap opens when the dryer runs and that no lint or snow is blocking it.
- Check the duct behind the dryer without pulling it far. Look for a crushed or kinked duct. Do not pull the dryer out far enough to strain a gas line or the cord.
- Run a short air-only cycle. If the dryer still does not heat, or the cycle ends early, stop and call us.
Why does my dryer run but not dry my clothes?
A dryer that is hot but leaves clothes damp is usually moving air poorly rather than failing to heat. A full lint screen, a crushed or long duct, or a blocked outside vent traps hot, moist air in the drum. In that case the vent is the repair, and the heating parts are fine. A dryer that runs with no heat at all points to a heat part, such as the element on an electric model or the igniter on a gas one.
That is why we test airflow and the heat circuit before we price a part. It also protects you, because a restricted vent overheats a dryer, and that is a fire risk worth fixing even when the machine still runs.
Are Speed Queen dryers worth repairing, and what does it cost?
Often yes, when the dryer is otherwise sound. Owner-confirmed residential dryer purchase prices run about $800 to $1,800 before installation. As a guide across brands, our typical all-in dryer repair runs $185–$365. A thermal fuse runs $165–$245 and an electric dryer heating element runs $265–$385. A Speed Queen part is quoted after diagnosis, since the price depends on the model and the part.
The trip fee is $149, credited toward the repair when you approve the work, and you get a written price before anything is ordered. Repairs carry a written 1-year parts-and-labor warranty. We are an independent repair company, not a Speed Queen authorized service provider, so a claim still under the manufacturer's warranty goes through the manufacturer.
What about Speed Queen commercial and laundromat dryers?
Coin-operated and on-premise laundry machines are commercial equipment, and the fee is different. A commercial diagnostic is $175–$299 depending on the equipment, it is billed separately and it is not credited toward the repair. The residential $149 trip fee on this page applies to home dryers only. For laundry rooms, see commercial laundry equipment repair.
Which other Speed Queen and dryer pages should I read?
Speed Queen overview
Speed Queen repair covers every Speed Queen appliance we repair.
Dryers from other brands
Dryer repair explains how a dryer repair works for any brand.
Washers
A Speed Queen washer has its own page: Speed Queen washer repair.
Error codes
See Speed Queen error codes before you reset anything.
Speed Queen dryer repair questions
How much does Speed Queen dryer repair cost in Minneapolis?
The trip fee is $149, credited toward the repair when you approve it. The repair price depends on the model and the part, and it is quoted in writing after diagnosis. Across brands, our typical all-in dryer repair runs $185–$365.
My Speed Queen dryer is hot but the clothes will not dry. Is it the heater?
Usually not. Hot air that does not dry is most often restricted exhaust: a full lint screen, a crushed duct or a blocked outside vent. Clear those first. If the airflow is good and the dryer still does not dry, a technician should check the heat circuit.
Why will my Speed Queen dryer not start?
Check that the door closes fully and that the breaker has not tripped. If both are fine, a door switch or a start control is the likely cause.
Is a dryer vent problem a fire risk?
It can be. A restricted vent makes a dryer overheat, so clean the lint screen every load and have a long or crushed duct fixed.
Do you repair gas dryers?
Yes. A gas dryer adds an igniter and a gas valve to the parts we test. If you smell gas, leave the house and call your gas utility or 911 from outside.
Can you fix my Speed Queen dryer today?
Yes. We offer same-day appointments, and we take calls from 7am to 9pm every day.