Viking Range & Stove Repair in Minneapolis & St. Paul
Burners that click without lighting, a flame that will not hold on low, or an oven that will not heat. We repair Viking ranges and stoves across the Twin Cities, open 7am to 9pm every day.
Who repairs Viking ranges and stoves in Minneapolis and St. Paul?
Central Minnesota Appliance Repair repairs Viking gas, dual fuel and induction ranges in Minneapolis, St. Paul and the suburbs. This page covers range and stove repair: burners that click or will not light, flames that will not hold on low, and ovens that will not heat. The $149 trip fee is credited toward the repair when you approve it.
Which Viking range do you have?
Viking's own site lists ranges in gas, dual fuel, induction and electric versions. The gas ranges come with open burners or sealed burners, in several widths across the Professional and Tuscany lines. Where the model and serial tag sits depends on the range, so check the Use & Care guide for yours, and send us a photo of the tag when you book so we can look up the right parts first.
The fuel type tells us where to start. On a gas range, burner and oven problems share the gas supply and the ignition system. On a dual fuel range, the burners are gas and the oven is electric, so a burner that will not light and an oven that will not heat have different causes. An induction or electric range has no burners to light at all.
This page covers the freestanding or slide-in range with burners on top and an oven below, which many owners call a Viking stove. For a separate rangetop or cooktop set into the counter, see Viking cooktop and rangetop repair. For the oven alone, see Viking oven repair.
What are the common Viking range problems, and who fixes them?
These are the calls we get most. The last column says what is safe to try yourself and what should wait for a technician.
| Symptom | Likely cause | You or a pro? |
|---|---|---|
| One burner clicks but will not light | Burner cap not seated flat, or moisture or food on the electrode | You: let it cool, dry the cap, reseat it. Pro if it persists |
| Every burner clicks all the time | Moisture in a knob switch, or a spark module reacting to it | You: keep liquids away and let it dry. Pro if it returns |
| Flame goes out or will not hold on low | Partly blocked port, head not seated, or a worn valve or orifice | You: clean the cool burner head. Pro for anything in the gas path |
| Oven will not light or preheats forever | Weak oven igniter on a gas oven, or an element or sensor on an electric one | Pro only |
| Uneven broiling or cold spots | Broiler element or igniter, or a range that is not level | Pro |
If you smell gas at any time, leave the house, do not touch a light switch, and call your gas utility or 911 from outside.
What should I check before I call about my Viking range?
These steps keep you away from live wiring and gas parts. Stop at any step if you smell gas.
- Turn every burner and the oven off and let the range cool. Do not work on a hot surface.
- Check the breaker. A range runs on its own breaker. If it tripped, reset it once. If it trips again, leave it off and call us.
- Photograph the model tag and any fault code. Do not rely on a reset to clear a code, since it may clear with power loss.
- Lift off a cool burner cap and head. Note how they sit. Wash them in warm soapy water, rinse, and let them dry for a few hours.
- Reseat the head and the cap flat, then try again. Look at each cap from the side. If a burner still clicks without lighting, stop and call us.
Why is my Viking range clicking, and what do the burners need?
On a Viking, the spark comes from an electrode beside each burner and a module behind the panel that fires them all. When water or grease sits on the electrode, or gets into the switch behind a knob, the spark finds an easier path and the burner keeps clicking without catching. Wet cleaning, a spray near the knobs and a boil-over that runs down the burner base are the usual causes.
A burner that will not stay lit on low usually has debris in the small simmer passages, a head that is not seated, or a worn valve. Cleaning the cool burner head is a fair first try. Anything that involves opening up the gas path is for a technician. Enlarging a simmer opening with a pin or a drill bit permanently spoils the low setting.
Open burners, sealed burners and the surface you cook on
Not every Viking has the same cooktop. Some ranges have open burners with a lot of exposed surface and a drip tray beneath. Others use sealed burners that contain spills. Open designs allow a bigger flame and easier cleaning of the burner head, but spills run into places they should not. Sealed designs make cleanup easy but depend on the caps being seated correctly.
Either way, burner health affects the oven, because heavy boil-overs run down into the range body. Keep burner caps clean and dry, use a soft brush on the ports, and let everything dry fully before you light the burner. Do not use oven cleaner on the burners or the control panel.
Is a Viking range the same thing as a Viking stove?
Yes, for most people. Range, stove and oven are used for the same appliance, so one page covers both words. If by stove you mean a built-in surface with no oven under it, that is a cooktop or rangetop, and Viking cooktop and rangetop repair is the right page.
What does Viking range repair cost, and when is replacing it worth it?
The trip fee is $149, credited toward the repair when you approve the work. After the diagnosis you get a written price for the part and the labor, and nothing starts until you agree. Viking-specific parts are quoted after diagnosis, since the price depends on the model and the part. Our Viking repair cost page explains how the quote is built.
A professional-style range is built to last, and a replacement also means the cabinets, gas line and ventilation. We tell you plainly if repeated failures or a part that is no longer made point toward replacing it.
Every completed repair is backed by a written 1-year parts-and-labor warranty. We are an independent repair company, not a Viking authorized service provider, so a claim still under the manufacturer's warranty goes through the manufacturer.
Where do you repair Viking ranges?
We cover the Twin Cities metro from 7am to 9pm every day. These pages cover the cities where Viking ranges are most common:
Minneapolis and St. Paul
Viking appliance repair in Minneapolis and Viking appliance repair in St. Paul.
Edina and Wayzata
Viking appliance repair in Edina and Viking appliance repair in Wayzata.
Viking range repair questions
Why does my Viking range click constantly even when it is off?
It is almost always moisture under a burner cap, or a switch or spark module that has failed and keeps firing. Let everything dry, reseat the caps, and call us if the clicking returns.
My Viking simmer burner will not go low. What is wrong?
Debris in the small simmer passages, a head that is not seated, or a worn valve. You can clean a cool burner head. Do not poke or enlarge any gas opening, and leave the rest to a technician.
How much does a Viking range repair cost?
The trip fee is $149, credited toward the repair when you approve it. The repair price depends on the model and the part, and it is quoted in writing after diagnosis.
Do you service older Viking ranges from the 1990s?
Yes. Many burner and ignition parts can still be found. Parts for early electronic oven controls can need special ordering, and we tell you the lead time before you commit.
Can you fix my Viking range today?
Yes. We offer same-day appointments, and we take calls from 7am to 9pm every day.
Are you a Viking authorized service provider?
No. We are an independent repair company. Work that is still under Viking's warranty should go through the manufacturer's own network.