Central Minnesota Appliance RepairCMN Appliance
HENNY PENNY FRYERS · TWIN CITIES

Henny Penny Fryer Repair in Minneapolis & St. Paul

Henny Penny fryer repair in Minneapolis, St. Paul and the Twin Cities, 7am to 9pm daily. Equipment covered: PFE-500 / PFG-600 / PFE-561 pressure fryers, Velocity Series PXE-100, Evolution Elite open fryers, OFE/OFG-320 series open fryers.

Who does Henny Penny fryer repair in the Twin Cities?

Central Minnesota Appliance Repair repairs Henny Penny pressure fryers (the 500, 561 and 600 and the Velocity PXE-100) and open fryers (Evolution Elite and OFE/OFG) in Minneapolis, St. Paul and the Twin Cities, 7am–9pm every day. We are an independent shop, not part of Henny Penny's service network. The diagnostic is $199–$299, waived when you approve the repair.

Book a Henny Penny fryer diagnostic online or call (651) 364-7466.

Last updated

About Henny Penny

Henny Penny is an employee-owned company in Eaton, Ohio, founded in 1957. Its pressure fryers include the Velocity Series, the 4-head PFE-500 and PFG-600, the 6-head PFE-561 and an 8-head High Volume line. Its open fryers include the F5, Evolution Elite, 320 and 340 Series and a High Volume group.

This page covers fryers only, and combi ovens are on Henny Penny combi oven repair. Henny Penny's manuals say all repairs must be performed by the manufacturer, its service agent or similarly qualified persons, and the pressure fryer manuals add their own warnings about the locking lid and the safety relief valve. For other makers see commercial fryer repair.

Henny Penny equipment we service

Henny Penny fryer lines we service and their common failure patterns
Series / linePositioningCommon failures
Models 500, 561 and 600PFE electric and PFG gas pressure fryers, 4-head and 6-headLid gasket, drain switch, high limit, temperature probe, filter pump
Velocity Series PXE-1008-head electric pressure fryer with automatic filtration and top-offPressure sensor, drain valve, oil level sensor, filtration, control
Evolution EliteOpen fryers, EEE electric and EEG gas, one to four wellsProbe, high limit, level sensors, filtration, elements, control
OFE/OFG 320 seriesOpen fryers, models 321 to 324Ignition on gas models, high limit, drain switch, probe, filter pump

Common Henny Penny failure patterns

  • E-10 on the display: the high limit tripped and must be reset after the oil cools.
  • E-15 on the display: drain valve open or a drain switch fault.
  • Pressure fryer will not build pressure: leaking lid gasket, dirty solenoid valve or too little product in the frypot.
  • Pressure not exhausting at the end of the cook cycle: solenoid or exhaust line.
  • Gas fryer E-20 codes: air switch, blower, ignition module or flame sense.
  • Filter pump will not run: tripped motor protector or an electrical fault.

Henny Penny parts we replace

Common Henny Penny parts include temperature probes, high-limit switches and drain switches. Parts are OEM.

  • Temperature probes
  • High-limit switches
  • Drain switches
  • Lid gaskets
  • Ignition modules for gas models

Henny Penny commercial repair FAQ

Which Henny Penny fryers do you repair?
We repair the Henny Penny 500, 561 and 600 pressure fryers, the Velocity Series, Evolution Elite open fryers and the OFE/OFG open fryers in Minneapolis, St. Paul and the metro. Henny Penny combi ovens are covered on their own page.
Where is the data plate on a Henny Penny fryer?
It depends on the line. Henny Penny's manuals put it inside the fryer door on electric 500 and 561 models, on the right side panel of the cabinet on gas 600 models and on the inside of the doors on Evolution Elite electric fryers. The OFE/OFG manual names both the inside of the front door and the right side panel.
My Henny Penny fryer shows E-10. What does it mean?
E-10 means the high limit tripped. Henny Penny's manuals say to let the oil cool, then reset the limit with its red reset button or switch. If it will not reset, the manual says it must be replaced, which is a service job. If it trips again, stop using the fryer and call.
What should I do if the relief valve on my pressure fryer vents?
Henny Penny's 500, 561 and 600 manual says to turn the main power switch off to release the pressure and have the fryer serviced before its next use. It also says never to pull the relief valve ring, because the steam causes severe burns.
Are you an authorized Henny Penny service agency?
No. We are an independent company and not an authorized service agency for Henny Penny. A fryer still under Henny Penny warranty should go to Henny Penny's service network first. For other fryers we back our own repairs with a 1-year parts-and-labor warranty.
How much does Henny Penny fryer repair cost?
Commercial diagnostic is $199–$299 depending on the equipment; it's waived when you approve the repair, and you get a written quote before any repair work. Repairs carry a 1-year parts-and-labor warranty.

How are Henny Penny fryers grouped?

Henny Penny's product pages sort its fryers into two families. Pressure fryers are the Velocity Series, the PFE-500 and PFG-600 four-head units, the PFE-561 six-head unit and an eight-head High Volume line. Open fryers are the F5 Series, Evolution Elite, the 320 and 340 Series, and a High Volume group with the OFE 291 and OFG 391.

A pressure fryer adds a sealed lid, a lid lock, a deadweight valve and a relief valve to the vat, probe, high limit and filter of an open fryer. Combi ovens are a separate product, covered on Henny Penny combi oven repair.

Which Henny Penny fryer lines are there?

LineTypeOne documented fact
Models 500, 561 and 600Pressure, electric and gasThe safety relief valve is an ASME spring-loaded valve set at 14.5 psi
Velocity Series PXE-100Pressure, electricOperating pressure is 12.0 psi, with 8 heads (24 lb) per load
Evolution Elite EEE-141 to 144, EEG-241 to 244Open, electric and gasiControl stores up to 40 programs
OFE/OFG-321 to 324Open, electric and gasA full frypot holds 65 lbs of shortening, and the gas models cannot run without electric power
High Volume OFE 291 and OFG 391OpenDescribed as suited to large batches of bone-in chicken, with a racking system

Source: Henny Penny pressure fryers

Source: Henny Penny open fryers

Source: Henny Penny Evolution Elite

Source: Henny Penny 500, 561 and 600 operator manual

Source: Henny Penny Velocity PXE-100 operation manual (KFC edition)

Source: Henny Penny OFE/OFG-321 to 324 operator manual

What do Henny Penny's manuals say an operator can check?

Steps the operator manuals give to the operator. Use the manual for your model.

Oil

The 500, 561 and 600 manual says to keep hot shortening at the level indicator line, filter after every 3 to 6 cook cycles and discard shortening that smokes or foams excessively.

Drain valve

For E-15 (500, 561, 600, OFE/OFG and Evolution Elite), close the drain valve fully. If it returns, the drain switch is checked.

High limit reset

Let the oil cool first. The 500, 561 and 600 manual puts a red reset button behind the door, the Velocity manual a momentary switch under the control panel vents, and the Evolution Elite manual says to wait 15 to 20 minutes and use the tool inside the left door.

Filter pump protector

Switch the main power off, wait about 5 minutes, then press the manual reset on the pump motor.

Evolution Elite

Each vat has its own power cord, and the manual's first check when the oil will not heat is that every cord is plugged in. E-31 means the elements are up and must be lowered into the vat.

What does Henny Penny reserve for qualified service?

The manuals say all repairs must be performed by the manufacturer, its service agent or similarly qualified persons.

Lid, lock and relief valve

The 500, 561 and 600 manual says the lid locks once the fryer is under pressure and must never be forced open, and that tampering with the safety relief valve voids agency approvals and the appliance warranty. The manual does give operators a quarterly gasket and limit stop routine. We do not coach lid or valve work over the phone: a lid that leaks steam or will not hold pressure is diagnosed on site.

Pressure sensor faults

On the Velocity PXE-100, E-13A and E-13B are answered with one instruction: call for service.

Gas and electrical

Use only the gas named on the data plate. For E-20 ignition codes the manuals allow a retry with the Timer button. If the code persists, the checks on the air switch, blower, ignition module and flame sensor are referred to the Technical Manual, which is technician work.

Oil past 420°F

If shortening exceeds 420°F, the 500, 561 and 600 manual says to shut off power at the main breaker and have the fryer repaired.

What do the Henny Penny fault codes mean?

From Henny Penny's manuals. Not every code appears on every line.

CodeMeaningFirst step in the manual
E-1Low oil in the pot (Velocity, and fryers with the FPS probe)Fill the vat to the full line
E-4Control board overheatingPower off and on, then check the side louvers
E-6A, E-6BTemperature probe open or shortedPower off and on, then check the probe
E-14Pressure too high in the vat (Velocity)Clean the deadweight
E-18Oil level sensor open (Evolution Elite)Power off and on, then have the sensor checked
E-86LPressure Assist leak (500, 561 and 600)Check around the lid for air leaks, then call for service

Source: Henny Penny 500, 561 and 600 operator manual

Source: Henny Penny Velocity PXE-100 operation manual (KFC edition)

Source: Evolution Elite operator manual FM05-053-h (dealer copy)

More questions about Henny Penny fryers

The fryer has power but the oil will not heat. What does the manual list?

Henny Penny's troubleshooting tables list a tripped high limit (E-10), an open drain valve (E-15), the gas valve knob turned off on gas models and an unplugged power cord on the Evolution Elite, where each vat has its own cord. Check those, then call.

Is deadweight cleaning daily or monthly?

The 500, 561 and 600 manual puts it on a daily schedule and warns that skipping it could let the fryer build too much pressure. The Velocity PXE-100 manual lists it as monthly.

Central Minnesota Appliance Repair · Independent appliance repair since 2009 · Open daily 7am to 9pm · (651) 364-7466 · 222 E Hennepin Ave, Minneapolis