We repair commercial and on-premise washers for hotels, apartment buildings, gyms, clinics and laundromats in Minneapolis, St. Paul and the surrounding metro. If a washer won't drain, won't spin, throws a door-lock code or leaks, call (651) 364-7466 and tell us the brand, the model and how many machines are down.
$175–$299 Diagnostic · depends on equipment
See brands we serviceSame-day priority
Commercial dispatch first.
Written quote first
In writing before work starts.
OEM parts on truck
Speed Queen, Huebsch, Continental Girbau, UniMac.
1-yr written warranty
Parts & labor in writing.
$175–$299 diagnostic, depending on the equipment. The diagnostic is billed separately from the repair, and you get a written quote before any repair work starts. Every completed repair carries a 1-year written parts-and-labor warranty.
Quick answer
Most commercial washer calls come down to a handful of parts: the drain pump or drain valve, the door lock or lid switch, belts and bearings, inlet valves, and the control board. We service front-load and top-load commercial washers from Speed Queen, Huebsch, Continental Girbau, UniMac, Electrolux Professional and Maytag Commercial. The commercial diagnostic is $175–$299 depending on the equipment, billed separately and not credited to the repair. Most repairs run $245–$685 depending on the part, quoted in writing before work starts, with a 1-year parts-and-labor warranty after.
Key facts
| Service | Commercial Washer Repair in the Twin Cities |
|---|---|
| Common repairs | Won't drain or won't spin; Door lock and lid switch faults; Leaks and worn seals; Loud noise, shaking and bearings; Fill, temperature and detergent-dispensing faults; Control board and payment faults |
| Diagnostic | $175–$299, depending on the equipment (billed separately from the repair) |
| Typical repair cost | Won't drain or won't spin: Priced by part · Door lock and lid switch faults: Priced by part · Leaks and worn seals: Priced by part · Loud noise, shaking and bearings: Quoted on site · Fill, temperature and detergent-dispensing faults: Priced by part · Control board and payment faults: Priced by part (written quote before work) |
| Warranty | 1-year written parts-and-labor warranty |
| Availability | Same-day appointments, 7am–9pm every day; call early |
| Brands | Speed Queen, Huebsch, Continental Girbau, UniMac, Electrolux Professional, Maytag Commercial, Whirlpool Commercial |
| Phone | (651) 364-7466 |
Need commercial appliance repair? Call 7am–9pm, every day.
Services covered
A washer stuck full of water is usually a failed drain pump, a clogged pump filter, a stuck drain valve or a lid or door switch that never tells the control the door is closed. We find which one before swapping parts.
Typical repair: Priced by part
Front-load washers that show a door error, or top-loaders that stop mid-cycle when the lid closes, almost always need a lock assembly, switch or wiring repair. These are on the truck for most models.
Typical repair: Priced by part
Door gaskets, drain hoses, tub seals and inlet hoses. We trace the water to its source, because a leak in a second-floor laundry room costs far more than the part.
Typical repair: Priced by part
Banging on spin is usually worn shocks, suspension or a failing tub bearing. We tell you plainly whether the machine is worth the bearing job or whether it's near the end of its life.
Typical repair: Quoted on site
Slow fill, no hot water, or a washer that won't pull chemical from the supply line. Inlet valves, water-level sensors and dispenser pumps.
Typical repair: Priced by part
Error codes, dead displays, cycles that won't start and coin or card machines that take payment but don't run. See also our coin-operated laundry repair page.
Typical repair: Priced by part
Why call us
In a laundromat, every machine that's down is income you aren't collecting. In an apartment building or hotel it turns into resident complaints and guest-room delays. Same-day appointments are available, so call early.
When a washer comes in for a drain problem we also look at the hoses, door seal, suspension and inlet screens, so you aren't calling again in a month for something we could have caught.
Commercial washers are built to be repaired, and most are worth fixing. We'll tell you if a machine isn't, before you buy another one.
The scope and price are quoted before any work starts, and every repair carries a 1-year parts-and-labor warranty.
Repair or replace?
| Situation | Our recommendation |
|---|---|
| Drain pump, lock, switch, valve or hose failure on a machine under 10 years old | Repair. These are routine parts and the machine has plenty of life left. |
| Failed tub bearing on a heavily used top-load or front-load washer | Depends on age and duty. We quote the repair and tell you honestly whether it makes sense for that machine. |
| Cracked tub, or a failed control board on a very old model with no parts support | Usually replace. We'll say so before you spend money. |
| Several machines in one room failing the same way | Look at the supply side first: water pressure, drain line, power or a shared payment system. |
Brands serviced
If your equipment is down right now
Confirm the machine has power and the breaker hasn't tripped. In a laundry room the washers often share a panel with the dryers.
Make sure nothing is caught in the door or lid and that it latches fully. A partly latched door stops the cycle on almost every commercial washer.
If the washer is full of water, look for a kinked drain hose or a clogged pump filter. Do not open a door on a machine with water inside.
Note any error code and the model and serial number from the label. It lets us bring the right parts.
(651) 364-7466, seven days a week from 7am to 9pm. Tell us how many washers are down and the building address.
FAQs
Yes. We repair commercial and on-premise washers across Minneapolis, St. Paul and the Twin Cities metro, plus western Wisconsin, for hotels, apartment buildings, gyms, clinics and laundromats.
Speed Queen, Huebsch, Continental Girbau, UniMac, Electrolux Professional, Maytag Commercial and Whirlpool Commercial, in both front-load and top-load models.
The usual causes are a clogged pump filter, a failed drain pump, a stuck drain valve, or a door or lid switch that isn't registering. We check each one before replacing anything.
The lock assembly is usually stuck or the control isn't getting a closed-door signal. It can also be water still in the tub. Don't force the door; call us and we'll release it safely.
The commercial diagnostic is $175–$299 depending on the equipment. It is billed separately and is not credited to the repair. After that, most commercial washer repairs land between $245 and $685 in parts and labor, plus the diagnostic depending on the part (drain pump, door lock, control board). Bearing and tub work is quoted on site. You always get the price in writing before work begins.
Yes. For laundry rooms and laundromats we diagnose and repair every down machine on the same trip where parts allow, which saves you repeat visits.
Yes. We work on the washer and its payment interface. See our coin-operated laundry repair page for how we handle machines that take money but won't start.
We're available seven days a week from 7am to 9pm, and same-day appointments are available, so call early. Call (651) 364-7466 and we'll give you a window when you book.
Commercial diagnostic is $175–$299 depending on the equipment; it's billed separately from the repair, and you get a written quote before any repair work.
First visit is card-on-file or COD. Once an account is established, we invoice Net-15 or Net-30 with itemized statements aligned to your accounting cycle. We accept POs from restaurant groups, hotel brands, property management firms, school districts, and city and county accounts. We accept ACH and card payments.
Yes — we work 7am to 9pm every day, including weekends, with no weekend surcharge. Same-day appointments are available for equipment failures across the Twin Cities metro; call early. We do not offer overnight or holiday dispatch.
A 1-year written parts-and-labor warranty on every commercial repair — the same failure mode, on the same unit, within 12 months is covered at no additional charge. Some sealed-system components carry an extended manufacturer warranty on top; those terms are itemized on the invoice.
Yes. Written estimates are issued before any major-component work. On request we provide inspector-ready documentation: repair scope, part numbers, and the date service restored the unit to spec.
Full Twin Cities metro — Minneapolis (55401–55488), Saint Paul (55101–55155), Bloomington, Edina, Eden Prairie, Maple Grove, Woodbury, Eagan, Plymouth, Minnetonka, Roseville, Burnsville, and the surrounding suburbs — plus Hudson, WI 54016 and Western Wisconsin. Commercial dispatch runs a daily route across the metro.
Related coverage
Who we serve
Commercial Washer Repair in the Twin Cities covers foodservice, hospitality, healthcare, retail, and institutional accounts across the Twin Cities metro. Multi-location operators get one dispatcher, one COI on file, and Net-15 / Net-30 invoicing.
Service area
We run a daily route across Minneapolis, Saint Paul and the surrounding metro. Pick your city for local details.
Need commercial appliance repair? Call 7am–9pm, every day.
