Central Minnesota Appliance RepairCMN Appliance
GE WASHER · ERROR CODES

GE Washer Error Codes E22, E23, FLO, oL, dE — What They Mean & How We Fix Them

GE, GE Profile, GE Café, and Haier-built GE front-load and top-load washers (GTW, GFW, GUD, PTW series) share most fault codes. Twin Cities hard water (~17 gpg) drives valve and pressure-sensor faults; oL is the most-Googled GE washer call.

  • 4.5★ · 990+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
(651) 364-7466
$149Trip feeWaived on repair
See brands we service

  • Same-day windows

    Call before 2pm for today's route.

  • Every Minneapolis ZIP

    55401–55455. No trip charge.

  • EPA 608 certified

    Sealed-system & refrigerant work.

  • 1-year warranty

    Parts and labor in writing.

Updated June 21, 2026 · Reviewed by service manager

Quick answer

GE Washer Error Code Repair — Twin Cities — Quick Answer

Browse the Minneapolis appliance repair hub for pricing, brands, and the full neighborhood list.

What we fix in Minneapolis

The Minneapolis repair mix

How to enter GE washer diagnostic mode

Most GE front-load and newer top-load washers enter service mode by pressing and holding Signal + Delay Start for ~3 seconds with the washer off; the display shows software version, then steps through valve, motor, pressure sensor, door lock, and heater tests. Some Profile models use a button-pattern entry — check the model-specific service sheet on the back panel.

oL — overload / unbalanced (the #1 GE washer call)

GE top-load HE washers (no agitator, deep impeller tub) trip oL when the load is unbalanced or too large. Open the lid, redistribute the load — especially heavy items like a single comforter — and restart. If oL appears with an empty tub, it's the shifter / actuator on the bottom of the gearcase ($285–$425) or, less often, the suspension rods.

E22 / E23 — drain fault

Drain restriction. On GE front-loaders the coin trap is behind a small access panel on the lower-right front — open, place a shallow pan, twist out the trap, clear coins / hair / debris. ~35% of E22 / E23 calls are a free fix at the coin trap. If trap is clean, suspect the drain hose then the drain pump ($245–$365).

GE washer repair in the Twin Cities

We stock GE inlet valves, drain pumps, pressure sensors and hoses, shifter / actuator assemblies, suspension rods, door-lock assemblies, thermistors, heaters, motor control boards, and the main control boards on the truck. 1-year written warranty.

From the truck

Field-service notes on washer repair

On washer repair, we keep the diagnostic tight because the failure catalog on this brand is well-documented. Minneapolis water hardness runs 8–15 grains per gallon depending on your source, which chews through steam-generator elements, valve seats, and dishwasher heating elements faster than the spec sheet assumes.

Because this page focuses on how to enter ge washer diagnostic mode, our tech opens the call by isolating that subsystem before touching anything else. OEM parts get sourced from Marcone, Reliable Parts, and 1st Source — never Amazon or eBay for anything sealed-system, control, or safety-critical. The $149 residential diagnostic is credited toward the repair if you approve; if you don't, you pay only the diagnostic and we leave a written scope. Every completed repair carries a 1-year parts and labor warranty in writing. The section above covers the specific failure surface — most ge front-load and newer top-load washers enter service mode by pressing and holding signal + delay start for ~3 seconds with the washer off; the display shows software version, then steps through valve, motor, pressure sensor, door lock, and heater tests.

We stock the top-30 wear items for this brand on the truck, so roughly 7 in 10 calls finish on the first visit without a parts return trip. We're EPA 608 certified for sealed-system and refrigerant work, licensed and insured in Minnesota, and every tech carries a factory diagnostic laptop for brand-specific service modes. If the model is out of parts support, we'll say so on the first call and refund the diagnostic — that's the honest read on a repair-vs-replace decision, and it's the same read we'd give a family member calling about the same washer.

Coverage

Minneapolis neighborhoods we cover

Same-day service routes through every Minneapolis ZIP — no separate trip charge anywhere inside city limits.

Neighborhood deep-dives

Neighborhoods

  • Uptown
  • Northeast Minneapolis
  • Downtown
  • North Loop
  • Mill District
  • Powderhorn
  • Longfellow
  • Linden Hills
  • Kingfield
  • Lyn-Lake
  • Lyndale
  • Whittier
  • Loring Park
  • Cedar-Riverside
  • Marcy-Holmes
  • Como
  • Phillips
  • Standish-Ericsson
  • Seward
  • Prospect Park
  • Nokomis
  • Bryn Mawr
  • Fulton
  • Tangletown
  • Armatage
  • Windom
  • Diamond Lake
  • Audubon Park
  • Sheridan
  • St. Anthony East
  • St. Anthony West
  • Logan Park
  • Holland
  • Columbia Park
  • Waite Park
  • Webber-Camden
  • Folwell
  • Jordan
  • Hawthorne
  • Near North
  • Harrison
  • Cedar-Isles-Dean
  • East Isles
  • ECCO
  • Lowry Hill
  • Lowry Hill East
  • Stevens Square
  • Elliot Park
  • Kenwood
  • Lake of the Isles
  • Lake Harriet
  • Lake Calhoun / Bde Maka Ska

ZIP codes

55401, 55402, 55403, 55404, 55405, 55406, 55407, 55408, 55409, 55410, 55411, 55412, 55413, 55414, 55415, 55416, 55417, 55418, 55419, 55454, 55455

Response windows

Drive times from our Minneapolis hub

Same-day windows are based on truck position at the time you call. The matrix below reflects typical mid-day response from our 222 E Hennepin hub.

CityDrive timeSame-day cutoff
Minneapolis (city)0–20 minDaily, call before 2pm
St. Paul15–25 minDaily, call before 2pm
Edina15–20 minDaily, call before 2pm
Bloomington20–25 minDaily, call before 1pm
Eden Prairie20–30 minDaily, call before 1pm
Maple Grove20–30 minDaily, call before 1pm
Plymouth20–25 minDaily, call before 1pm
Roseville15–20 minDaily, call before 2pm
Woodbury25–35 minDaily, call before 12pm
Golden Valley10–15 minDaily, call before 2pm

FAQ

Minneapolis questions, answered

  • What does oL mean on a GE washer?

    oL = overloaded or unbalanced. Open the lid, redistribute the load (heavy items like a comforter are the usual cause), and restart. If oL appears with an empty tub, it's the shifter / actuator ($285–$425).

  • What does E22 or E23 mean on a GE washer?

    E22 / E23 = drain fault. Clear the coin trap first (lower-right front access panel on front-loaders). ~35% of E22 / E23 calls are free fixes there. Drain pump replacement runs $245–$365.

  • What does FLO mean on a GE washer?

    FLO = won't fill. Check the supply valves are open and the inlet screens at the back of the washer are clear of sediment (Twin Cities hard water silts them). If supply and screens are fine, the inlet valve solenoid is failed — $225–$285.

  • How do I enter GE washer diagnostic mode?

    Most models: hold Signal + Delay Start for ~3 seconds with washer off. The display shows software version then cycles through valve, motor, pressure, door, and heater tests. Stored codes display as Exx after the test.

  • How much does GE washer repair cost?

    Most GE washer repairs land $245–$485 all-in. Drain pump $245–$365. Inlet valve $225–$285. Shifter / actuator $285–$425. Door lock $245–$345. Pressure sensor $225–$325. Main control board $385–$525. The $149 trip fee is waived when you approve the repair.

Related Minneapolis repair pages

What will this cost?

Pricing & repair-cost pages

Trying to decide repair vs. replace? These pages break down real all-in Twin Cities pricing by brand, model class, and failure mode.

Need fridge repair? See our Minneapolis page

Same-day refrigerator repair in Minneapolis — Sub-Zero, Samsung, LG, Whirlpool, KitchenAid. Flat $149 trip fee waived with repair, 1-year warranty on parts and labor.

Book washer repair in Minneapolis

Have your model and serial number handy. Call before 2pm and we'll usually have a same-day window across Minneapolis.

(651) 364-7466Contact us →

Brands we service in Minneapolis

Dedicated Minneapolis landing pages for each brand we run most — fault codes, pricing, and the OEM parts our trucks stock for Minneapolis homes.