Central Minnesota Appliance RepairCMN Appliance
TURBOCHEF · TWIN CITIES

TurboChef Oven Repair in Minneapolis & St. Paul

TurboChef rapid-cook oven repair in Minneapolis, St. Paul and the Twin Cities, 7am to 9pm daily. Equipment covered: Rapid-cook ovens, High h conveyors, Batch ovens, Fire pizza oven. The commercial diagnostic is $199–$299, waived when you approve the repair, and repairs carry a 1-year written warranty.

  • 4.5★ · 900+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day

Open today · 7am–9pm

4.5★ · 900+ reviews · 1-year warranty

Who does TurboChef rapid-cook oven repair in the Twin Cities?

Central Minnesota Appliance Repair, an independent repair company, repairs TurboChef ventless ovens, including the rapid-cook Bullet, CIBO+, Sota i-series and ECO models and the High h conveyors, in Minneapolis, St. Paul and the Twin Cities, 7am–9pm every day. The diagnostic is $199–$299 and is waived when you approve the repair.

Book a TurboChef rapid-cook oven diagnostic online or call (651) 364-7466.

Last verified by Central Minnesota Appliance Repair

Gas and electric equipment serviced. Same-day appointments are available, 7am–9pm every day. 1-year written warranty on parts & labor. Net-15 / Net-30 invoicing for established accounts.

About TurboChef

TurboChef's website groups its ovens as ventless high-speed impingement (Double Batch, Single Batch, Fire and the High h Conveyors 1618, 2020 and 2620), ventless rapid cook (Bullet, CIBO+, Sota i1, i3, i5, ECO and ECO ST) and ventless multicook (PLEXOR M2). They are common in cafes, convenience stores and pizzerias.

We are an independent repair company, not a factory-authorized service agency for TurboChef. We repair these ovens and give a 1-year written parts-and-labor warranty on our work.

TurboChef equipment we service

TurboChef rapid-cook oven lines we service and their common failure patterns
Series / linePositioningCommon failures
High-speed impingementDouble Batch, Single Batch, Fire, High h Conveyors 1618, 2020, 2620Convection fans, heat and controls, conveyor drive on High h models
Rapid cookBullet, CIBO+, Sota i1, i3, i5, ECO, ECO ST (impinged air with microwave assist)Fans, filters and airflow, microwave-assist side, controls
MulticookPLEXOR M2 (microwave and impingement in separate modes)Fans, controls, mode faults

Common TurboChef failure patterns

  • Food undercooked at normal time: slowing convection fan or clogged filter.
  • Oven slow to heat: element, relay or probe.
  • Oven shuts down mid-service: airflow or overheat fault from a clogged filter.
  • Display unresponsive: control board or connection.
  • High h conveyor belt slows: drive motor, gearbox or belt.

TurboChef parts we replace

Common TurboChef parts include convection fan motors, filters and elements. Parts are OEM. A part that has to be ordered is quoted before work starts.

  • Convection fan motors
  • Filters
  • Elements
  • Temperature probes
  • Relays

TurboChef commercial repair FAQ

Which TurboChef ovens do you repair?
We repair the TurboChef ventless ovens listed on TurboChef's site: Double Batch, Single Batch, Fire, High h Conveyors, Bullet, CIBO+, Sota i1, i3 and i5, ECO, ECO ST and PLEXOR M2. Give us the model from the data plate when you call so we can plan the diagnostic and the right visit.
Are you a TurboChef-authorized service agency?
No. We are an independent company and not a TurboChef agency. A ventless oven still under factory warranty goes through TurboChef; after that we can repair it, with our own 1-year warranty on parts and labor.
Why is my TurboChef undercooking food?
Common causes are a slowing convection fan, a clogged filter, or weak heat. On rapid-cook models the microwave-assist side can also be at fault. The technician separates the airflow, heat and microwave sides before replacing any part, and staff should not open cavity panels.
How much does TurboChef repair cost?
Commercial diagnostic is $199–$299 depending on the equipment; it's waived when you approve the repair, and you get a written quote before any repair work. Fan, filter, element and control repairs are quoted in writing before work begins, and each repair has a 1-year written parts-and-labor warranty.

Businesses that use TurboChef equipment

TurboChef rapid-cook oven equipment (Rapid-cook ovens · High h conveyors · Batch ovens · Fire pizza oven) is found in the Twin Cities businesses below. Multi-location accounts get one dispatcher, one COI on file, and Net-15 / Net-30 invoicing.

  • Ghost kitchens
  • Restaurants
  • Pizzerias
  • Bakeries
  • School kitchens
  • Hospital kitchens

TurboChef down right now?

Open today · 7am–9pm

4.5★ · 900+ reviews · 1-year warranty

Which TurboChef ovens do we repair?

TurboChef lists these ovens on its own website, grouped by how they cook. We repair TurboChef ovens as an independent shop, and the data plate model tells us which group yours belongs to.

GroupHow TurboChef describes itModels listed
Ventless high-speed impingementHigh-velocity impinged air, ventlessDouble Batch, Single Batch, Fire artisan pizza oven, High h Conveyors 1618, 2020 and 2620
Ventless high-speed rapid cookHigh-speed impinged air with microwave assistBullet, CIBO+, Sota i1, i3, i5, ECO and ECO ST
Ventless high-speed multicookMicrowave and impingement in separate cooking modesPLEXOR M2

TurboChef's product page does not state fuel or power type for these models, so we ask for the data plate before scheduling.

Source: TurboChef high-speed impingement ovens, manufacturer page

What is different about repairing a rapid-cook or ventless oven?

A conventional pizza oven needs a hood. TurboChef groups these ovens under ventless high-speed ovens, which means the oven handles its own exhaust and filtration instead of relying on a Type I hood. That changes what staff clean and what the technician checks. Air filters and any filtration the maker specifies need cleaning or replacement on the manufacturer's schedule, and a neglected filter shows up as an oven that runs hot, shuts down or smells.

The rapid-cook group adds a second heat source. TurboChef describes its rapid cook ovens as combining high-speed impinged air with microwave assist, so these ovens have convection fans and heaters plus microwave components. A technician working on them has to separate the airflow side from the microwave side before replacing parts, and has to follow the manufacturer's safety instructions around microwave components. We do not publish part numbers or error codes here. We work from the model's own manual.

The conveyor and batch models do the work of a pizza oven in a smaller footprint. The High h Conveyors (1618, 2020 and 2620) are conveyors; Double Batch and Single Batch are batch ovens; Fire is the artisan pizza oven. See conveyor pizza oven repair for belt, drive and finger faults that apply to the conveyors.

What fails on TurboChef ovens in a c-store, cafe or pizzeria?

These are general patterns on high-speed ovens. A technician reads the model's manual for any code before replacing a part.

Heat and fan faults

Convection fans run for long stretches, so bearings and motors wear. A fan that slows leaves the food undercooked at the same cook time. A failed heating element or relay leaves the oven slow to heat or unable to reach setpoint.

Filters and airflow

Ventless ovens depend on clean filters and clear airflow. A clogged filter restricts air and heat and can trip an overheat or fault shutdown. Following the maker's cleaning schedule is the cheapest repair you can make.

Microwave-assist side

On rapid-cook models, undercooked food with normal heat can point at the microwave side while the fans are fine. That diagnosis requires proper tools and procedures, so staff should never open the oven's cavity panels.

Controls and touchscreens

Controls, probes and displays fail from heat, grease and cleaning chemicals. A fault that clears on restart and returns is a sign to call, not to keep restarting.

Conveyor drive on High h models

The High h Conveyors have a belt drive. Belt, motor and gearbox faults on a conveyor are repaired the same way as on any impingement conveyor.

TurboChef symptoms and first checks

SymptomLikely causeFirst check
Food undercooked at normal cook timeSlowing convection fan, clogged filter, weak heatFan speed and filter condition
Oven slow to heat or will not reach temperatureElement or relay, probe faultElement current and probe reading
Oven shuts down during a busy periodOverheat or airflow fault, clogged filterFilter condition and the control's last fault
Display or touchscreen unresponsiveControl board, display or connectionPower reset once, then call if it returns
Belt slows or stops on a High h conveyorDrive motor, gearbox, belt wearMotor current and belt tension

Commercial diagnostic: $199–$299 depending on equipment, waived when you approve the repair. Commercial oven repairs typically run $285–$985 in parts and labor.

Are you an authorized TurboChef service agency?

No. Central Minnesota Appliance Repair is an independent repair company and not a factory-authorized service agency for TurboChef. TurboChef directs buyers of consumables and accessories to its parts partner, Partstown.com. If your oven is under warranty, use the channel your warranty names. For a local company in Minneapolis and St. Paul, or an oven that is out of warranty, call us.

We repair ovens in convenience stores, cafes, taprooms and pizzerias, 7am–9pm every day, with a written quote after diagnosis and a 1-year written parts-and-labor warranty on our repair. See commercial pizza oven repair for every pizza oven type, and commercial oven repair for other commercial ovens.

More TurboChef questions

Do you repair TurboChef sandwich and c-store ovens?

Yes. TurboChef's rapid-cook ovens, including the Bullet, CIBO+, Sota i1, i3, i5, ECO and ECO ST that it lists, are common in cafes and convenience stores. Give us the model and what the oven does, and we plan the diagnostic around it.

Can I clean the filters myself?

Cleaning filters is routine care, but follow your oven's manual for how, how often, and what cleaner to use. Do not open cavity or microwave-component panels yourself. A technician handles anything behind a panel.

Central Minnesota Appliance Repair · Independent appliance repair since 2009 · Open daily 7am to 9pm · (651) 364-7466 · 222 E Hennepin Ave, Minneapolis