WOLF · EDINA, MN

Wolf Appliance Repair in Edina, MN Factory-Familiar · Pro-Style Specialists

Edina has the highest Wolf install density in the Twin Cities. Country Club, Rolling Green, White Oaks, and Indian Hills kitchens are stocked with DF36 / DF48 dual-fuel ranges, paired SO wall-oven towers, CG induction and gas cooktops, MW microwave drawers, and the MDD steam oven. Our senior built-in tech runs Edina weekly with Wolf-specific truck stock — DC power-supply boards, spark modules, igniter assemblies, infrared broil elements, and OEM control knobs.

  • 4.5★ · 990+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
(651) 364-7466
$149Trip feeWaived on repair
See brands we service
  • Same-day windows

    Call before 2pm for today's route.

  • On the daily Edina route

    South / West Metro coverage.

  • Wolf parts on the truck

    Common-failure OEM parts stocked.

  • 1-year written warranty

    Parts and labor in writing.

Wolf repair in Edina, MN: quick answer

Wolf models we work most often in Edina

These are the Wolf models we see weekly across Edina kitchens. We carry the failure-pattern parts on the truck and coordinate with Edina kitchen designers when a built-in needs to be pulled.

Dual-fuel & gas ranges

DF364G · DF366 · DF484CG · DF486G · GR366 · AG364C (sealed-burner)

Built-in wall ovens & steam ovens

SO30CM/B · SO30TM/S · DO30CM/B (double oven) · MDD30TE (steam) · MDD30TM

Cooktops (gas, induction, electric)

CG365P/S · CG486G · CI365C/S (induction) · CT36G/S · CT15I (15" modular)

Microwave drawers & convection

MW24 · MWD30 · MDD24 · MD30TE/S (convection steam)

What we see most on Wolf in Edina

Wolf DF dual-fuel range repair in Country Club & Rolling Green

DF364 / DF366 / DF484 / DF486 are the most-installed pro-style range in Edina. The most common Edina Wolf calls: DC power-supply board failure (oven won't power up, no display), spark-module / igniter failures on the surface burners (clicks but won't light or won't stop clicking), infrared broil element burnout, and convection-fan motor seizure. We carry the DC board, spark module, and igniter kits on the truck — most DF repairs finish on the first visit. We test the gas supply pressure first on older Edina homes where mid-century supply lines barely meet pro-style spec; if the supply is undersized, the range will under-fire regardless of the regulator.

Wolf SO & DO wall ovens — and the MDD steam oven

SO30 single ovens and DO30 double ovens with the bake/broil element burnout, oven temp-sensor drift, and control-board failure. The MDD steam oven has a water-reservoir solenoid + descale-cycle pattern unique to Wolf — we run the steam-system service routine before condemning the steam generator. Edina towers (single + steam stacked) get diagnosed together since cabinetry pulls are coordinated.

Wolf cooktops — CG gas, CI induction, CT modular

CG365 / CG486 sealed-burner gas cooktops with spark-module failures and stuck-igniter clicking. CI induction cooktops with the F-codes pointing at the inverter board (we have the board diagnostic and won't condemn a $1,400 generator without testing). CT36 electric and CT15 modular pieces with element and control-touch failures. We test the actual fault before swapping the most-expensive part.

Wolf microwave drawers & convection steam

MW24 / MWD30 / MDD24 microwave drawers with the door-interlock fault, drawer-motor failure, and magnetron burnout. MD30TE convection-steam combi with the water-supply solenoid and steam-vent issues. Common-failure parts on the truck for the drawer line; magnetrons are typically next-day.

Sub-Zero / Wolf paired kitchens in Edina

Almost every Wolf range in Edina is paired with a Sub-Zero built-in fridge. We diagnose both on the same visit when needed (EPA Section 608 certified for Sub-Zero sealed-system work), which saves a second trip charge and gets the kitchen back to working in one window.

Edina ZIP coverage

We cover every Edina ZIP — 55410, 55416, 55424, 55435, 55436, 55439. Edina is on the daily route; no separate trip charge inside city limits.

Map of our Wolf appliance repair service area in Edina, MN

Wolf in Edina, MN — FAQs

  • How fast can you get to Edina for Wolf repair?

    Edina is on the daily route from the Minneapolis hub. Same-day windows are usually available when you call before 2pm weekdays. Daily routes through Country Club, Indian Hills, Rolling Green, Morningside, and the 50th & France corridor.

  • Do you cover DF36 and DF48 dual-fuel ranges?

    Yes — they're our highest-volume Wolf models in Edina. DC power-supply boards, spark modules, igniter kits, infrared broil elements, and convection-fan motors are weekly calls here and on the truck.

  • Can you service a Wolf MDD steam oven in Edina?

    Yes. We run the steam-system service routine (descale, reservoir solenoid test, vent inspection) before condemning the steam generator. Common-failure parts on the truck; steam generators are typically next-day.

  • Do you coordinate with Edina kitchen designers when a Wolf needs to be pulled?

    Yes — we know the local designers and cabinet shops and can coordinate panel re-alignment and trim resets after a built-in is pulled for service.

  • Is the trip fee credited toward the Wolf repair?

    Yes. The $189 built-in / pro-style trip fee is waived when you approve the repair, so you only pay for the work itself.

  • Can you diagnose Wolf and Sub-Zero on the same visit?

    Yes — almost every Wolf in Edina is paired with a Sub-Zero. We diagnose both on the same trip when needed. EPA Section 608 certified for Sub-Zero sealed-system work.

  • Do you offer warranty on Wolf repairs in Edina?

    1-year written parts-and-labor warranty on every completed Wolf repair.