GE · BLOOMINGTON, MN

GE Appliance Repair in Bloomington, MN Profile · Café · Monogram · Same-Day Bloomington Service

GE Profile, Café, and Monogram are everywhere in mid-century rambler kitchens and new-build townhomes — Profile French-door fridges, Café slide-in ranges, GE front-load washers, and Monogram built-ins. We carry GE evap-fan motors, water-inlet valves, bake elements, and door-lock assemblies on the truck. We run Bloomington daily on the South Metro route via I-494 / I-35W.

  • 4.5★ · 990+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
(651) 364-7466
$149Trip feeWaived on repair
See brands we service
  • Same-day windows

    Call before 2pm for today's route.

  • On the daily Bloomington route

    South / West Metro coverage.

  • GE parts on the truck

    Common-failure OEM parts stocked.

  • 1-year written warranty

    Parts and labor in writing.

GE repair in Bloomington, MN: quick answer

GE models we work most often in Bloomington

These are the GE models we see weekly across Bloomington kitchens and laundry rooms. Common-failure parts for every model below are on the truck.

Profile & Café French-door fridges

PFE28KYNFS · PYE22KYNFS · CFE28UP2MS1 (Café) · PSS28KSHSS (side-by-side)

Café & Profile slide-in ranges / wall ovens

CGS750P (Café gas) · PHS930YPFS (Profile induction) · JTS5000SNSS (wall oven) · PEB9159SJSS (microwave)

GE front-load & top-load washers / dryers

GFW850SPNRS · GFW650SSNWW · GTW720BSNWS (top-load) · GFD85ESPNRS (dryer)

Profile & Monogram dishwashers

PDT715SYNFS · PDT785SYNFS · ZDT925SSNSS (Monogram)

What we see most on GE in Bloomington

GE Profile & Café French-door fridges in Hyland Lake & Normandale

Profile PFE28 / PYE22 and Café CFE28 French-doors see evap-fan motor failure (warm fridge with frost on the evap coil), in-door water-filter housing leaks, and ice-maker auger jams. We carry the GE WR60X10141 fan motor, water-filter housings, and ice-maker assemblies on the truck. Inverter compressor diagnostics done on the first visit.

GE Café slide-in ranges & wall ovens

Café CGS gas slide-ins and Profile PHS induction ranges fail on the spark module, bake element, and convection-fan motor. JTS Profile wall ovens see hinge sag and temperature-sensor drift (F2/F3 codes). Common-failure parts and the right hinge kit on the truck.

GE GFW front-load washers — drain-pump, door-lock, suds codes

GFW850 / GFW650 front-loaders see drain-pump seizure (filter-trap full of lint and coins), door-lock failure, and door-boot tears that leak into the cabinet. Drain pumps, boots, and lock assemblies on the truck. UltraFresh vent-system fan failures resolved on the first trip.

GE Profile & Monogram dishwashers

PDT715 / PDT785 dishwashers see drain-pump failure, sump-and-filter clog from broken-glass debris, and door-spring cable fatigue. Monogram ZDT panel-ready units get hinge and panel-mount adjustments at the same call.

Bloomington daily routes & response time

Bloomington is on the daily South Metro route via I-494 / I-35W. Same-day windows are usually available when you call before 2pm weekdays. No separate trip charge inside city limits.

Bloomington ZIP coverage

We cover every Bloomington ZIP — 55420, 55425, 55431, 55437, 55438. Bloomington is on the daily route; no separate trip charge inside city limits.

Map of our GE appliance repair service area in Bloomington, MN

GE in Bloomington, MN — FAQs

  • How fast can you get to Bloomington for GE repair?

    Bloomington is on the daily South Metro route via I-494 / I-35W. Calls placed before 2pm typically get a same-day window. Daily routes through Hyland Lake, Normandale, Penn Lake, and the I-494 townhome corridor.

  • Do you service GE Monogram built-in refrigerators?

    Yes — Monogram ZIC / ZISS built-ins are weekly work. We carry the right gaskets, evap fans, and door-bin parts; trim-kit alignment included.

  • Can you fix Café induction-range error codes?

    Yes — F2/F3, F9, and induction-coil faults are common on Café PHS units. Coil and control-board diagnostics done on the first visit.

  • Is there a separate trip charge for Bloomington?

    No — no separate trip charge inside Bloomington city limits. The flat trip fee ($149 standard) is waived when you approve the repair.

  • Do you offer warranty on GE repairs in Bloomington?

    1-year written parts-and-labor warranty on every completed GE repair.

  • Which Bloomington ZIP codes do you cover for GE repair?

    All of Bloomington, MN — ZIPs 55420, 55425, 55431, 55437, 55438. GE jobs in Bloomington are part of the daily metro loop, so most addresses see a same-day or next-morning window when you call before 2pm.

  • Do you service GE appliances in Bloomington condos, townhomes, and stacked-laundry installs?

    Yes. GE repairs in Bloomington cover single-family homes, townhomes, and condo buildings. We coordinate building access and COIs ahead of time, and we bring stair-rated tooling for stacked GE laundry units so the appliance does not have to be uninstalled to reach the back panel.