GE · SAINT PAUL, MN

GE Appliance Repair in Saint Paul, MN

Profile · Café · Monogram

St. Paul homes run a wide mix of GE appliances — Profile French-door fridges and washers in remodeled Highland Park and Mac-Groveland kitchens, Café slide-in ranges, Monogram built-ins in Summit Avenue and Crocus Hill homes, and older GE laundry pairs in East Side and Frogtown houses. We repair GE refrigerators, ranges, ovens, washers, dryers and dishwashers and use OEM parts.

  • 4.5★ · 900+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day

Open today · 7am–9pm

4.5★ · 900+ reviews · $149 trip fee credited to the repair · 1-year warranty

  • Same-day windows

    7am–9pm every day; call early.

  • On the daily Saint Paul route

    South / West Metro coverage.

  • OEM GE parts

    Parts that need ordering are quoted first.

  • 1-year written warranty

    Parts and labor in writing.

GE repair in Saint Paul, MN: quick answer

GE models we work most often in Saint Paul

These are GE models we commonly work on in St. Paul kitchens and laundry rooms.

Profile & Café French-door fridges

PFE28KYNFS · PYE22KYNFS · CFE28UP2MS1 (Café) · PSS28KSHSS (side-by-side)

Café & Profile slide-in ranges / wall ovens

CGS750P (Café gas) · PHS930YPFS (Profile induction) · JTS5000SNSS (wall oven) · PEB9159SJSS (microwave)

GE front-load & top-load washers / dryers

GFW850SPNRS · GFW650SSNWW · GTW720BSNWS (top-load) · GFD85ESPNRS (dryer)

Profile & Monogram dishwashers

PDT715SYNFS · PDT785SYNFS · ZDT925SSNSS (Monogram)

What we see most on GE in Saint Paul

GE Profile & Café French-door fridges in Highland Park & Mac-Groveland

Profile PFE28 / PYE22 and Café CFE28 French-doors commonly need an evaporator fan motor (warm fridge with frost on the evaporator coil), a water-filter housing repair, or an ice-maker repair. Older St. Paul homes often have long supply-line runs, so we also check water pressure when an ice maker stops. We use OEM parts and can diagnose inverter compressor systems.

GE Café slide-in ranges & wall ovens

Café CGS gas slide-ins commonly need a spark module, bake element, or convection-fan motor. Profile PHS induction ranges can throw error codes or have induction-coil and control-board faults, and JTS Profile wall ovens see hinge sag and temperature-sensor drift. We service gas and electric ranges and ovens.

GE GFW front-load washers — drain-pump, door-lock, suds codes

GFW850 / GFW650 front-loaders see drain-pump seizure (a filter trap packed with lint and small objects), door-lock failure, and door-boot tears that leak into the cabinet. We use OEM drain pumps, door boots, and lock assemblies, and we also service the UltraFresh vent system fan.

GE Profile & Monogram dishwashers

PDT715 / PDT785 dishwashers see drain-pump failure, sump-and-filter clog from broken-glass debris, and door-spring cable fatigue. Monogram ZDT panel-ready units get hinge and panel-mount adjustments at the same call.

Saint Paul routes & response time

We are dispatched from our Minneapolis office and take calls 7am–9pm every day, weekends included. Same-day appointments are available — call early for the best chance. The $149 trip fee is credited toward the repair when you approve it.

Saint Paul ZIP coverage

We cover every Saint Paul ZIP — 55101, 55102, 55103, 55104, 55105, 55106, 55107, 55108, 55114, 55116, 55117, 55119, 55130. Saint Paul is in our service area; the same $149 trip fee applies inside city limits, credited toward the repair.

Map of our GE appliance repair service area in Saint Paul, MN

GE in Saint Paul, MN — FAQs

  • How fast can you get to Saint Paul for GE repair?

    We take calls 7am–9pm every day, and same-day appointments are available — call early for the best chance at a same-day window. We serve Highland Park, Mac-Groveland, Summit Hill, Cathedral Hill, Como, and Saint Anthony Park, dispatched from our Minneapolis office.

  • Do you service GE Monogram built-in refrigerators?

    Yes. We repair Monogram ZIC / ZISS built-in refrigerators, including evaporator fans, gaskets, and door-bin parts, and we align the trim and panels when the visit is done.

  • Can you fix error codes on a GE Profile induction range?

    Yes. Profile PHS induction ranges can show error codes tied to the induction coil, sensors, or control board. We read the code, check it against GE service data, and test the coil and board before recommending a repair.

  • What is the trip fee for GE repair in Saint Paul?

    The trip fee is a flat $149 anywhere in Saint Paul. It is credited toward the repair when you approve the quote; if you decline, the $149 covers the diagnosis.

  • Do you offer warranty on GE repairs in Saint Paul?

    Every completed GE repair carries a 1-year written parts-and-labor warranty, covering both the replacement part and our labor.

  • Which Saint Paul ZIP codes do you cover for GE repair?

    All of Saint Paul, MN — ZIPs 55101–55108, 55114, 55116, 55117, 55119, and 55130. Same-day appointments are available, so call early for the best chance at a same-day window.

  • Do you service GE appliances in Saint Paul condos, townhomes, and stacked-laundry installs?

    Yes. GE repairs in Saint Paul cover single-family homes, townhomes, and condo buildings. We coordinate building access and can provide a certificate of insurance ahead of time.