Central Minnesota Appliance RepairCMN Appliance
GE · EDINA, MN

GE Appliance Repair in Edina, MN

Profile · Café · Monogram · Same-Day Edina Service

GE Profile, Café, and Monogram are everywhere in mid-century rambler kitchens and new-build townhomes — Profile French-door fridges, Café slide-in ranges, GE front-load washers, and Monogram built-ins. We use OEM GE parts for evap-fan motors, water-inlet valves, bake elements and door-lock assemblies. We serve Edina from our Minneapolis office.

  • 4.5★ · 900+
  • 1-Yr Warranty
  • OEM Parts
  • Same-Day
Call (651) 364-7466

Open today · 7am–9pm

4.5★ · 900+ reviews · $149 trip fee credited to the repair · 1-year warranty

See brands we service

  • Same-day windows

    7am–9pm every day; call early.

  • On the daily Edina route

    South / West Metro coverage.

  • OEM GE parts

    Parts that need ordering are quoted first.

  • 1-year written warranty

    Parts and labor in writing.

GE repair in Edina, MN: quick answer

GE models we work most often in Edina

These are the GE models we see weekly across Edina kitchens and laundry rooms. Parts that need ordering are quoted before work starts.

Profile & Café French-door fridges

PFE28KYNFS · PYE22KYNFS · CFE28UP2MS1 (Café) · PSS28KSHSS (side-by-side)

Café & Profile slide-in ranges / wall ovens

CGS750P (Café gas) · PHS930YPFS (Profile induction) · JTS5000SNSS (wall oven) · PEB9159SJSS (microwave)

GE front-load & top-load washers / dryers

GFW850SPNRS · GFW650SSNWW · GTW720BSNWS (top-load) · GFD85ESPNRS (dryer)

Profile & Monogram dishwashers

PDT715SYNFS · PDT785SYNFS · ZDT925SSNSS (Monogram)

What we see most on GE in Edina

GE Profile & Café French-door fridges in Country Club & Morningside

Profile PFE28 / PYE22 and Café CFE28 French-doors see evap-fan motor failure (warm fridge with frost on the evap coil), in-door water-filter housing leaks, and ice-maker auger jams. We use OEM parts. Inverter compressor diagnostics done.

GE Café slide-in ranges & wall ovens

Café CGS gas slide-ins fail on the spark module, bake element, and convection-fan motor, while Profile PHS and Café CHS induction ranges can have cooktop generator-board and touch-control faults. JTS Profile wall ovens see hinge sag and temperature-sensor drift, which can show up as oven F2/F3 codes. We use OEM parts.

GE GFW front-load washers — drain-pump, door-lock, suds codes

GFW850 / GFW650 front-loaders see drain-pump seizure (filter-trap full of lint and coins), door-lock failure, and door-boot tears that leak into the cabinet. We use OEM parts. UltraFresh vent-system fan failures resolved.

GE Profile & Monogram dishwashers

PDT715 / PDT785 dishwashers see drain-pump failure, sump-and-filter clog from broken-glass debris, and door-spring cable fatigue. Monogram ZDT panel-ready units get hinge and panel-mount adjustments at the same call.

Edina routes & response time

Same-day windows are usually available when you call early, and we're open 7am-9pm every day. The flat $149 trip fee applies in Edina and is credited toward the repair when you approve it.

Edina ZIP coverage

We cover every Edina ZIP — 55424, 55435, 55436, 55439. Edina is in our service area; the same $149 trip fee applies inside city limits, credited toward the repair.

Map of our GE appliance repair service area in Edina, MN

GE in Edina, MN — FAQs

  • How fast can you get to Edina for GE repair?

    Calls placed early typically get a same-day window, and we're open 7am-9pm every day. Routes through Country Club, Morningside, Cornelia, Indian Hills, and the 50th & France condos.

  • Do you service GE Monogram built-in refrigerators?

    Yes — Monogram ZIC / ZISS built-ins are weekly work. Gaskets, evap fans, and door-bin parts are replaced with OEM parts; trim-kit alignment included.

  • Can you fix Café induction-range error codes?

    Yes. On Profile PHS and Café CHS induction ranges, cooktop faults are usually generator-board or coil problems, while oven F2/F3/F9 codes point to sensor or control-board issues. We diagnose the cooktop and oven sides separately.

  • Is there a separate trip charge for Edina?

    The trip fee in Edina is the same flat $149 as everywhere else, and it is credited toward the repair when you approve it.

  • Do you offer warranty on GE repairs in Edina?

    1-year written parts-and-labor warranty on every completed GE repair.

  • Which Edina ZIP codes do you cover for GE repair?

    All of Edina, MN — ZIPs 55424, 55435, 55436, 55439. GE jobs in Edina are part of the daily metro loop, so most addresses can get a same-day or next-morning window when you call early.

  • Do you service GE appliances in Edina condos, townhomes, and stacked-laundry installs?

    Yes. We repair GE appliances in Edina single-family homes, townhomes, and condos, including stacked laundry units. For condo buildings, tell us about any building access or elevator rules when you book so we can plan the visit.